SETNET(8) System Manager’s Manual SETNET(8)

NAME

setnet.sh — minimalist shell script for network configuration with dialog interface

SYNOPSIS

setnet.sh [−c config_file] [−d trace_file] [−h] [−v]

DESCRIPTION

setnet.sh is a shell script for network management, with a terminal user interface based on dialog(1). It works as a wrapper around the basic tools for the configuration of Ethernet and Wi-Fi interfaces, including ip(8), dhclient(8), and wpa_cli(8).

setnet.sh allows to configure static and/or DHCP-based connections to a LAN/WLAN, and to manage the authentication to a Wi-Fi network. At present, open (no key), WPA-Personal (WPA-PSK and WPA2-PSK), and WPA-Enterprise (EAP/PEAP or EAP/TLS) are supported.

setnet.sh can be also used as a minimal interface to basic network diagnostics tools, including ping(8), host(1), traceroute(1), and netstat(8). It allows to show some information about network status, including the routing table, content of resolv.conf and nsswitch.conf, active TCP/IP connections, running daemons, etc., and to dump those information to a file. Support for posting a dump of network status to websites like pastebin.com is under development.

setnet.sh recognises the following options:

−c config_file

specify a configuration file

−d trace_file

enable dialog debug, and write the trace to the provided trace_file

−h

print a minimal help and exit

−v

show version and exit

The main setnet.sh menu allows to choose from five sections, as described below:

Setup

This section allows to configure a network interface, selected from the list of available network devices (as returned by "ip -o link"). Once a device has been selected, it is possible to choose on of the following functions

View

View current device configuration, i.e., MAC address, link status, IP address, etc.

WiFi

(available only for wi-fi devices) Manage the association to a Wi-Fi network. This allows to restart wpa_supplicant, to manage the currently configured networks, to add a new network, and to show (and modify) the configuration file used by wpa_supplicant.

Conf

Configure the IP address of the device. It is possible to choose between DHCP-based and Static IP configuration.

Start

Bring the interface up (using "ip link set <DEVNAME> up").

Stop

Bring the interface down (using "ip link set <DEVNAME> down").

Restart

Restart the interface by putting it first down and then up again.

Info

This section provides information about the current network status and allows to perform basic diagnostic tasks. The following functions are available:

ARP

Show the current ARP table

Connections

List active network connections by running "netstat -tnp"

DNS

List the configured DNS, by showing the "nameserver" entries in /etc/resolv.conf.

Lookup

Perform a DNS lookup through "host <HOST>". If <HOST> is a FQDN, the result will be the IP address(es) associated to that domain name. If <HOST> is an IP address, the result is the list of FQDNs associated to that address.

Ping

Ping a host, using its IP of FQDN (Fully-Qualified Domain Name) by running "ping -c 5 <HOST>".

Resolver

Show the system resolver configuration, i.e. the content of the file /etc/nsswitch.conf

Routes

Show the current routing table

Services

Show a list of processes (daemons) listening on TCP ports, by running "netstat -ltnp".

Traceroute

Show the route to a given host, as obtained by running the command "traceroute <HOST>".

Dump

Dump information about current network status to a file. The user can choose which information to include from a checklist. The support for dumping network information to web applications like pastebin is currently under development.

Log

Show the logfile written by setnet.sh

About

Provide information about copyright, contributors, and license.

ENVIRONMENT

setnet.sh uses the following environment variables:

WPA_FILE

The configuration file for wpa_supplicant(1) (default to /etc/wpa_supplicant/wpa_setnet.conf ).

LOGFILE

The file used by setnet.sh for logging (default to /var/log/setnet.log ).

TRUNCATE_LOG

If it is set to "yes" or "YES", the log file is truncated when setnet.sh starts.

WIFI_DEVICES

List of wifi devices. This list is used only when automatic detection of wifi devices fails.

These variables are normally set in the setnetrc configuration file (see FILES below). setnet.sh will exit if either WPA_FILE or LOGFILE are undefined.

FILES

setnet.sh uses a configuration file which defines the environment variables described in ENVIRONMENT above. setnet.sh looks for the following files:

the config_file provided through the option -c (if any).

the file /etc/setnetrc (if it exists)

the file ~/.setnetrc (if it exists)

in that order. If a config_file is provided, the other files are ignored. Otherwise, if ~/.setnetrc exists, it takes precedence over /etc/setnetrc.

SEE ALSO

ip(8), dhclient(8), wpa_supplicant(8), wpa_cli(8), netstat(8).

AUTHORS

setnet.sh is Free Software, distributed under the terms of the GNU General Public License (GPL), version 3 of the License.

setnet.sh is copyleft (c) by Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org>

BUGS

At present, setnet.sh can reliably manage no more than one Wi-Fi device at a time. This is due to the fact that the configuration file for wpa_supplicant is defined in the environment variable WPA_FILE. There is no limitation on the number of Ethernet devices that setnet.sh can manage, but you should be careful with having more than one dhclient processes running, since each of them will try to add a default gateway to the kernel routing table.

SECURITY CONSIDERATIONS

Configuring networking is an administration task, and setnet.sh requires root privileges to work properly. It is possible to allow a regular user to run setnet.sh, e.g. by using sudo(8) or sup(1) (see https://sup.dyne.org/ for more information about sup).

setnet.sh can recognise if it is running under sudo(8) or sup(1), by looking at the content of the environment variables SUDO_UID/SUP_UID, SUDO_GID/SUP_GID, and SUDO_USER/SUP_USER. When setnet.sh is run under sudo(8) or sup(1), some functionalities are disabled. In particular, loading and editing an alternate wpa_supplicant configuration file is forbidden (and for obvious reasons, since this would in principle allow the sudoer to edit *any* file in your system).

Linux January 06, 2017 Linux