new devuan package for experimental

12 files changed, 482 insertions, 0 deletions

diff --git a/debian/README.Debian b/debian/README.Debian
new file mode 100644
index 0000000..0cad044
--- /dev/null
+++ b/debian/README.Debian
@@ -0,0 +1,132 @@
++--------------+
+|    setnet    |
++--------------+
+
+Copyleft (C) Vincenzo "KatolaZ" Nicosia <katolaz@freaknet.org>
+		  	 2016, 2017
+
+=== DESCRIPTION ===
+
+setnet is a shell script with a dialog UI to configure ethernet and
+wifi connections. It is meant to be POSIX-compliant, and has been
+tested with bash, busybox, dash, ksh, mksh, posh, and yash. It is
+still to be considered beta software, so you should use it AT YOUR OWN
+RISK, but it is already fully functional. 
+
+=== LICENSE ===
+
+setnet is Free Software, and can be used and distributed under the
+terms of the GNU General Public License, either version 3 of the
+licence or, at your option, any later version.
+
+Please see the file LICENSE for more information
+
+=== DEPENDENCIES ===
+
+In order to run setset, you MUST satisfy this (relatively small) set
+of dependencies:
+
+ - a posix-compliant shell (bash, busybox, dash, ksh, mksh, posh, and
+   	 				 	    yash have been tested)
+
+ - dialog (version 1.2 tested, but it should work with previous
+   		  versions as well)
+
+ - dhcp-client (for dhclient, tested with isc-dhcp-client)
+
+ - iproute2 (for ip)
+
+ - wireless-tools (for iwconfig, currently required for interface
+   				   identification)
+
+Most of those tools might already be installed in your system anyway.
+In particular, setnet uses:
+
+ - dialog: to provide a minimal Text-based User Interface,
+ - ip: to configure network interfaces and get information about them,
+ - dhclient: for DHCP-based IP configuration
+ - iwconfig: to check whether a network device is a wifi adapter
+
+In order to use the full set of functionalities provided by setnet,
+you MIGHT also need the following packages:
+
+ - wpa_supplicant (for wifi configuration)
+
+ - net-tools (for netstat, to gather information about network status)
+
+ - iputils-ping (for ping)
+
+ - bind9-nost (for host, used to check DNS configuration)
+
+ - traceroute (to trace the route between your host and any other host
+   			   in the Internet)
+
+Again, most of them should be already installed in your system anyway.
+
+=== USAGE ===
+
+setnet is installed under /usr/sbin/setnet.sh. If invoked with "-h",
+it provides a list of supported options:
+
+$ ./setnet.sh -h
+Usage: setnet.sh [OPTION]
+Options:
+         -c cfg_file    Load configuration from cfg_file.
+         -v  Print version number and exit.
+         -h  Show this help.
+$
+
+If the argument "-c" is specified, setnet will use the provided
+configuration file. Otherwise, it will look for its configuration file
+in one of the following locations:
+
+  - /etc/setnetrc
+  - ~/.setnetrc
+  
+in the given order. The following configuration variables should be
+defined in setnetrc:
+
+
+  - WPA_FILE
+ 	This is the file configuration file used by wpa_supplicant. 
+
+  - LOGNAME
+	This is the file used for logging.
+
+  - TRUNCATE_LOG
+  	if equal to "yes", the log file will be truncated when setnet
+	starts
+
+
+=== root vs. mortal users ===
+
+Networking is an amdinistration task, and as such should be performed
+by the host administrator, i.e., the user with UID 0 (normally called
+"root"). However, in many modern GNU/Linux systems it is customary to
+allow normal users to perform some administration tasks. There are at
+least two concrete possibilities to allow a particular user (in the
+following we call such user "fool") to configure network interfaces
+using setnet.
+
+
+-- 1) First approach: using sudo
+
+If sudo is installed in your system, it is sufficient to add the
+following line:
+
+  fool     ALL=NOPASSWD: /usr/sbin/setnet.sh
+
+to the file /etc/sudoers, and the user "fool" will be able to run
+setnet.sh with effective UID 0 (i.e., as if it was root), by using the
+command:
+
+[fool@host]$ sudo /usr/sbin/setnet.sh
+
+and thus will be able to perform all the needed admin tasks to
+configure networking.
+
+-- 2) Second approach: using sup
+
+......TO BE DOCUMENTED......
+
+
diff --git a/debian/README.source b/debian/README.source
new file mode 100644
index 0000000..7c8fb9c
--- /dev/null
+++ b/debian/README.source
@@ -0,0 +1,10 @@
+setnet for Debian
+-----------------
+
+<this file describes information about the source package, see Debian policy
+manual section 4.14. You WILL either need to modify or delete this file>
+
+
+
+ -- Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org>  Sat, 29 Apr 2017 11:13:55 +0100
+
diff --git a/debian/changelog b/debian/changelog
new file mode 100644
index 0000000..9aaaa89
--- /dev/null
+++ b/debian/changelog
@@ -0,0 +1,52 @@
+setnet (0.3.2-1) unstable; urgency=medium
+
+  * Version 0.3.2 -- See ChangeLog for details
+
+ -- Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org>  Wed, 08 Mar 2017 11:45:45 +0000
+
+setnet (0.3.1-1) unstable; urgency=medium
+
+  * Version 0.3.1 -- See ChangeLog for details 
+
+ -- Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org>  Tue, 07 Mar 2017 11:29:07 +0000
+
+setnet (0.3-1) unstable; urgency=medium
+
+  * Version 0.3 -- See ChangeLog for details
+
+ -- Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org>  Sun, 29 Jan 2017 15:43:35 +0000
+
+setnet (0.2.1-1) unstable; urgency=medium
+
+
+  * Version 0.2.1 -- See ChangeLog for details 
+
+ -- Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org>  Sat, 07 Jan 2017 23:29:44 +0000
+
+setnet (0.2-1) unstable; urgency=medium
+
+		* Initial release (20170104)
+
+		== Major Changes ==
+
+		+ Polished code to make it posix-shell compliant
+
+		+ Tested with bash, busybox, dash, ksh, mksh, posh, yash
+
+		+ Added support and checks for hard, soft, and optional
+		dependencies
+
+		+ Added standard command line options (-c, -h, -v)
+
+		+ Added submenu "Info" with basic network testing tools
+
+		+ Added submenu "Dump" to dump network information to a file
+
+		+ Added submenu "Log" (shows setnet logfile)
+
+		+ Added status information in device configuration panel
+
+		+ Added minimal README.Debian file
+
+
+ -- Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org>  Wed, 04 Jan 2017 18:52:56 +0000
diff --git a/debian/compat b/debian/compat
new file mode 100644
index 0000000..ec63514
--- /dev/null
+++ b/debian/compat
@@ -0,0 +1 @@
+9
diff --git a/debian/control b/debian/control
new file mode 100644
index 0000000..4070ca4
--- /dev/null
+++ b/debian/control
@@ -0,0 +1,19 @@
+Source: setnet
+Section: unknown
+Priority: optional
+Maintainer: Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org>
+Build-Depends: debhelper (>=9)
+Standards-Version: 3.9.8
+Homepage: http://kalos.mine.nu/setnet 
+#Vcs-Git: git://anonscm.debian.org/collab-maint/setnet.git
+#Vcs-Browser: https://anonscm.debian.org/cgit/collab-maint/setnet.git
+
+Package: setnet
+Architecture: all
+Depends: bash | busybox | dash | ksh | mksh | posh | yash | zsh, dhcp-client, dialog, iproute2, iw 
+Suggests: wpasupplicant, pastebinit, net-tools, iputils-ping, bind9-host, traceroute
+Description: simple shell/dialog tool to configure networks 
+ setnet is a shell script with a dialog UI to configure ethernet
+ and wifi connections. It is meant to be POSIX-compliant, and has
+ been tested on bash, busybox, dash, ksh, mksh, posh, yash, and zsh.
+ 
diff --git a/debian/copyright b/debian/copyright
new file mode 100644
index 0000000..efdd21d
--- /dev/null
+++ b/debian/copyright
@@ -0,0 +1,38 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: setnet
+Source: <url://example.com>
+
+Files: *
+Copyright: <years> <put author's name and email here>
+           <years> <likewise for another author>
+License: <special license>
+ <Put the license of the package here indented by 1 space>
+ <This follows the format of Description: lines in control file>
+ .
+ <Including paragraphs>
+
+# If you want to use GPL v2 or later for the /debian/* files use 
+# the following clauses, or change it to suit. Delete these two lines
+Files: debian/*
+Copyright: 2017 Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org>
+License: GPL-2+
+ This package is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+ .
+ This package is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>
+ .
+ On Debian systems, the complete text of the GNU General
+ Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".
+
+# Please also look if there are files or directories which have a
+# different copyright/license attached and list them here.
+# Please avoid to pick license terms that are more restrictive than the
+# packaged work, as it may make Debian's contributions unacceptable upstream.
diff --git a/debian/docs b/debian/docs
new file mode 100644
index 0000000..770ae9a
--- /dev/null
+++ b/debian/docs
@@ -0,0 +1,3 @@
+notes.txt
+README.md
+TODO.org
diff --git a/debian/init.d.ex b/debian/init.d.ex
new file mode 100644
index 0000000..34620c4
--- /dev/null
+++ b/debian/init.d.ex
@@ -0,0 +1,166 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          setnet
+# Required-Start:    $local_fs $network $remote_fs $syslog
+# Required-Stop:     $local_fs $network $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: <Enter a short description of the software>
+# Description:       <Enter a long description of the software>
+#                    <...>
+#                    <...>
+### END INIT INFO
+
+# Author: Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org>
+
+# Do NOT "set -e"
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+DESC="setnet"
+NAME=setnet
+DAEMON=/usr/sbin/setnet
+DAEMON_ARGS=""
+PIDFILE=/var/run/$NAME.pid
+SCRIPTNAME=/etc/init.d/$NAME
+
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
+# and status_of_proc is working.
+. /lib/lsb/init-functions
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
+		|| return 1
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
+		$DAEMON_ARGS \
+		|| return 2
+	# The above code will not work for interpreted scripts, use the next
+	# six lines below instead (Ref: #643337, start-stop-daemon(8) )
+	#start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
+	#	--name $NAME --test > /dev/null \
+	#	|| return 1
+	#start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
+	#	--name $NAME -- $DAEMON_ARGS \
+	#	|| return 2
+
+	# Add code here, if necessary, that waits for the process to be ready
+	# to handle requests from services started subsequently which depend
+	# on this one.  As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	# Wait for children to finish too if this is a daemon that forks
+	# and if the daemon is only ever run from this initscript.
+	# If the above conditions are not satisfied then add some other code
+	# that waits for the process to drop all resources that could be
+	# needed by services started subsequently.  A last resort is to
+	# sleep for some time.
+	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+	[ "$?" = 2 ] && return 2
+	# Many daemons don't delete their pidfiles when they exit.
+	rm -f $PIDFILE
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
+	return 0
+}
+
+case "$1" in
+  start)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+	do_start
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  status)
+	status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+	;;
+  #reload|force-reload)
+	#
+	# If do_reload() is not implemented then leave this commented out
+	# and leave 'force-reload' as an alias for 'restart'.
+	#
+	#log_daemon_msg "Reloading $DESC" "$NAME"
+	#do_reload
+	#log_end_msg $?
+	#;;
+  restart|force-reload)
+	#
+	# If the "reload" option is implemented then remove the
+	# 'force-reload' alias
+	#
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	do_stop
+	case "$?" in
+	  0|1)
+		do_start
+		case "$?" in
+			0) log_end_msg 0 ;;
+			1) log_end_msg 1 ;; # Old process is still running
+			*) log_end_msg 1 ;; # Failed to start
+		esac
+		;;
+	  *)
+		# Failed to stop
+		log_end_msg 1
+		;;
+	esac
+	;;
+  *)
+	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+	exit 3
+	;;
+esac
+
+:
diff --git a/debian/install b/debian/install
new file mode 100644
index 0000000..dab18fe
--- /dev/null
+++ b/debian/install
@@ -0,0 +1,5 @@
+setnet.sh /usr/sbin
+setnetrc /etc/
+wpa_setnet.conf /etc/wpa_supplicant/
+setnet.8.gz /usr/share/man/man8/
+ChangeLog /usr/share/doc/setnet/
diff --git a/debian/rules b/debian/rules
new file mode 100755
index 0000000..ce15cce
--- /dev/null
+++ b/debian/rules
@@ -0,0 +1,32 @@
+#!/usr/bin/make -f
+# See debhelper(7) (uncomment to enable)
+# output every command that modifies files on the build system.
+#DH_VERBOSE = 1
+
+# see EXAMPLES in dpkg-buildflags(1) and read /usr/share/dpkg/*
+DPKG_EXPORT_BUILDFLAGS = 1
+include /usr/share/dpkg/default.mk
+
+# see FEATURE AREAS in dpkg-buildflags(1)
+#export DEB_BUILD_MAINT_OPTIONS = hardening=+all
+
+# see ENVIRONMENT in dpkg-buildflags(1)
+# package maintainers to append CFLAGS
+#export DEB_CFLAGS_MAINT_APPEND  = -Wall -pedantic
+# package maintainers to append LDFLAGS
+#export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed
+
+
+# main packaging script based on dh7 syntax
+%:
+	dh $@ 
+
+# debmake generated override targets
+# This is example for Cmake (See http://bugs.debian.org/641051 )
+#override_dh_auto_configure:
+#	dh_auto_configure -- \
+#	-DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH)
+
+
+
+
diff --git a/debian/source/format b/debian/source/format
new file mode 100644
index 0000000..163aaf8
--- /dev/null
+++ b/debian/source/format
@@ -0,0 +1 @@
+3.0 (quilt)
diff --git a/debian/watch.ex b/debian/watch.ex
new file mode 100644
index 0000000..8efa24e
--- /dev/null
+++ b/debian/watch.ex
@@ -0,0 +1,23 @@
+# Example watch control file for uscan
+# Rename this file to "watch" and then you can run the "uscan" command
+# to check for upstream updates and more.
+# See uscan(1) for format
+
+# Compulsory line, this is a version 3 file
+version=3
+
+# Uncomment to examine a Webpage
+# <Webpage URL> <string match>
+#http://www.example.com/downloads.php setnet-(.*)\.tar\.gz
+
+# Uncomment to examine a Webserver directory
+#http://www.example.com/pub/setnet-(.*)\.tar\.gz
+
+# Uncommment to examine a FTP server
+#ftp://ftp.example.com/pub/setnet-(.*)\.tar\.gz debian uupdate
+
+# Uncomment to find new files on sourceforge, for devscripts >= 2.9
+# http://sf.net/setnet/setnet-(.*)\.tar\.gz
+
+# Uncomment to find new files on GooglePages
+# http://example.googlepages.com/foo.html setnet-(.*)\.tar\.gz