summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rwxr-xr-xsetnet.dash377
1 files changed, 327 insertions, 50 deletions
diff --git a/setnet.dash b/setnet.dash
index bb92fdd..e005efa 100755
--- a/setnet.dash
+++ b/setnet.dash
@@ -19,7 +19,8 @@
#
# ----------------------------------------------------------------------
#
-# Copyleft (c) KatolaZ (katolaz@freaknet.org) -- (2016, 2017)
+# Copyleft (C) Vincenzo "KatolaZ" Nicosia (katolaz@freaknet.org) --
+# (2016, 2017)
#
#
@@ -55,6 +56,14 @@ HARD_DEPS="ip dhclient dialog netstat"
SOFT_DEPS="wpa_cli wpa_supplicant"
+##
+## Optional dependencies. The script will check if those dependencies
+## exist, and if they do, will set a variable HAS_OPTS which contains
+## the names of the commands actually found
+##
+
+OPT_DEPS="host arping traceroute netstat pastebinit"
+
#################################
#####################################
@@ -226,11 +235,14 @@ check_shell(){
##
## - check if the current shell is supported through check_shell
##
-## - each command in HARD_DEPS MUST exists, or the script exits
+## - each command in HARD_DEPS MUST exist, or the script exits
##
-## - each command in SOFT_DEPS SHOULD exists, od the script will log a
+## - each command in SOFT_DEPS SHOULD exist, or the script will log a
## warning
##
+## - each command in OPT_DEPS MIGHT exist, and if it does its name is
+## included in the variable "HAS_OPTS"
+##
##function
check_deps(){
@@ -239,19 +251,29 @@ check_deps(){
for h in ${HARD_DEPS}; do
_W=$(which ${h})
- if [ -z $_W ]; then
+ if [ -z ${_W} ]; then
echo "Error: required command \"${h}\" not found. Exiting..."
exit 1
fi
- log "check_deps" "${h}...found"
+ log "check_deps" "NOTICE: required command '${h}'...found"
done
for s in ${SOFT_DEPS}; do
_S=$(which ${s})
- if [ -z $_S ]; then
- log "check_deps" "WARNING: ${s} not found! Some functions might not work properly"
+ if [ -z ${_S} ]; then
+ log "check_deps" "WARNING: suggested command '${s}' not found! Some functions might not work properly"
fi
done
+
+ HAS_OPTS=""
+ for o in ${OPT_DEPS}; do
+ _O=$(which ${o})
+ if [ -n ${_O} ]; then
+ HAS_OPTS=" ${HAS_OPTS} ${o} "
+ log "check_deps" "NOTICE: optional command '${o}'...found"
+ fi
+ done
+
}
##
@@ -430,9 +452,9 @@ config_ethernet_dhcp(){
##local
DEVNAME=$1
- eval "${DIALOG} --infobox 'Running \"dhclient ${DEVNAME}\"' ${INFO_HEIGHT} ${INFO_WIDTH}"
- dhclient -r ${DEVNAME}
- dhclient ${DEVNAME}
+ eval "${DIALOG} --msgbox 'Running \"dhclient ${DEVNAME}\"' ${INFO_HEIGHT} ${INFO_WIDTH}"
+ dhclient -r ${DEVNAME}
+ dhclient ${DEVNAME}
show_device_conf ${DEVNAME}
}
@@ -855,7 +877,7 @@ wifi_load_file(){
if [ $? -eq 0 ]; then
SEL_FILE=$(cat ${TMPFILE})
else
- eval "${DIALOG} --clear --infobox 'WPA_FILE was not modified' \
+ eval "${DIALOG} --clear --msgbox 'WPA_FILE was not modified' \
${INFO_HEIGHT} ${INFO_WIDTH}"
return
fi
@@ -870,12 +892,12 @@ wifi_load_file(){
wifi_restart_wpa ${DEVNAME} ${WPA_FILE}
fi
else
- eval "${DIALOG} --clear --infobox 'Invalid file name!\n WPA_FILE *not* changed' \
+ eval "${DIALOG} --clear --msgbox 'Invalid file name!\n WPA_FILE *not* changed' \
${WINDOW_HEIGHT} ${WINDOW_WIDTH}"
return
fi
else
- eval "${DIALOG} --clear --infobox 'WPA_FILE was not modified' \
+ eval "${DIALOG} --clear --msgbox 'WPA_FILE was not modified' \
${INFO_HEIGHT} ${INFO_WIDTH}"
fi
@@ -957,22 +979,20 @@ config_wifi(){
configure_device(){
##local
-DEVNAME=$1
-
- case ${DEVNAME} in
- eth*)
- config_ethernet ${DEVNAME}
- ;;
- wlan*)
- config_wifi ${DEVNAME}
- ;;
- *)
- eval "${DIALOG} --clear --title 'ERROR' --msgbox \
- '${DEVNAME}: Unsupported device type' \
- ${WINDOW_HEIGHT} ${WINDOW_WIDTH}"
- ;;
- esac
+ DEVNAME=$1
+ ## Check if the network device is a wifi -- WEAK
+ IS_WIFI=$(iwconfig ${DEVNAME} 2>/dev/null | grep -c "IEEE 802.11")
+
+ case ${IS_WIFI} in
+ 0)
+ config_ethernet ${DEVNAME}
+ ;;
+ *)
+ config_wifi ${DEVNAME}
+ ;;
+ esac
+
}
@@ -1002,8 +1022,12 @@ show_device_menu(){
##local
DEVNAME=$1
+
while true; do
- eval "${DIALOG} --clear --cancel-label 'Up' --menu 'Device: ${DEVNAME}' \
+ DEV_STATUS=$(ip -o link | cut -d " " -f 2,9 | grep -E "^${DEVNAME}: " | cut -d " " -f 2)
+ log "show_device_menu" "DEVNAME: ${DEVNAME} DEV_STATUS: ${DEV_STATUS}"
+ eval "${DIALOG} --clear --cancel-label 'Up' --menu\
+ 'Device: ${DEVNAME}\nStatus: ${DEV_STATUS}' \
${WINDOW_HEIGHT} ${WINDOW_WIDTH} 8 \
'View' 'View current configuration' \
'Conf' 'Configure device' \
@@ -1082,18 +1106,27 @@ show_info(){
cat <<EOF > ${TMPFILE}
-== setnet.sh 0.1 ==
+ -+- setnet.sh ${VERSION} -+-
setnet.sh is a simple state-less tool to manage and configure network
-interfaces. It is a shell wrapper around the functionalities of "ip",
-"dhclient", "wpa_cli", and can be used to configure network
-connections via Ethernet/Wi-Fi interfaces.
+interfaces. It is a shell wrapper around the functionalities of
+standard command-line tools, including "ip", "dhclient", "wpa_cli",
+etc., and can be used to configure network connections via
+Ethernet/Wi-Fi interfaces.
-Both Static and DHCP-based IP configuration is supported.
+Both Static and DHCP-based IP configuration are supported.
At the moment, only WPA-PSK and open (no key) Wi-Fi connections are
available.
+For more information, please visit the webpage of the project:
+
+ http://kalos.mine.nu/setnet/
+
+Please report bugs at:
+
+ https://git.devuan.org/KatolaZ/setnet
+
EOF
eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}"
return
@@ -1104,9 +1137,15 @@ show_copyright(){
cat <<EOF > ${TMPFILE}
-== setnet.sh 0.1 ==
+ -+- setnet.sh ${VERSION} -+-
+
+--------------------------------------------------------------------
+
+ Copyleft (C) Vincenzo "KatolaZ" Nicosia <katolaz@freaknet.org>
+ 2016, 2017
+
+--------------------------------------------------------------------
-(c) KatolaZ (katolaz@freaknet.org) -- 2016, 2017
EOF
eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}"
@@ -1119,7 +1158,7 @@ show_license(){
cat <<EOF > ${TMPFILE}
-== setnet.sh 0.1 ==
+ -+- setnet.sh ${VERSION} -+-
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -1134,11 +1173,12 @@ General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
-----------------------------------------------------------------------
+--------------------------------------------------------------------
- (c) KatolaZ <katolaz@freaknet.org> -- 2016, 2017
+ Copyleft (C) Vincenzo "KatolaZ" Nicosia <katolaz@freaknet.org>
+ 2016, 2017
-----------------------------------------------------------------------
+--------------------------------------------------------------------
EOF
eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}"
@@ -1177,8 +1217,31 @@ about_menu(){
}
##function
+notfound(){
+
+ CMDNAME=$1
+
+
+ eval "${DIALOG} --clear --msgbox 'Sorry! Commmand ${CMDNAME} not found!'" \
+ ${INFO_HEIGHT} ${INFO_WIDTH}
+
+}
+
+
+##function
netdiag_DNS(){
+ DUMPFILE=$1
+
+ if [ -n "${DUMPFILE}" ]; then
+ ## Dump to file
+ printf "\n======== DNS Configuration (/etc/resolv.conf)\n" >> ${DUMPFILE}
+ cat /etc/resolv.conf >> ${DUMPFILE}
+ echo "==================================" >> ${DUMPFILE}
+ return 0
+ fi
+
+ ## Dump to dialog
NAMESERVERS=$(grep '^nameserver' /etc/resolv.conf)
MSG_STR="Configured name servers in /etc/resolv.conf ==\n\n${NAMESERVERS}"
@@ -1188,10 +1251,49 @@ netdiag_DNS(){
}
##function
+netdiag_resolver(){
+
+ DUMPFILE=$1
+
+ if [ -n "${DUMPFILE}" ]; then
+ ## Dump to file
+ printf "\n======== Resolver Configuration (/etc/nsswitch.conf)\n" >> ${DUMPFILE}
+ grep -v '^#' /etc/nsswitch.conf >> ${DUMPFILE}
+ echo "==================================" >> ${DUMPFILE}
+ return 0
+ fi
+
+ ## Dump to dialog
+ RESOLVER=$(grep -v '^#' /etc/nsswitch.conf)
+
+ eval "${DIALOG} --clear --title 'Resolver configuration (/etc/nsswitch.conf)' \
+ --msgbox '${RESOLVER}' "\
+ ${WINDOW_HEIGHT} ${WINDOW_WIDTH}
+
+}
+
+
+##function
netdiag_routes(){
- ROUTES=$(netstat -rn > ${TMPFILE} )
+ DUMPFILE=$1
+ HAS_NETSTAT=$(echo ${HAS_OPTS} | grep -c " netstat ")
+ if [ ${HAS_NETSTAT} -ne 1 ]; then
+ notfound "nestat"
+ return
+ fi
+
+ if [ -n "${DUMPFILE}" ]; then
+ ## Dump to file
+ printf "\n======== Routing table\n" >> ${DUMPFILE}
+ netstat -rn >> ${DUMPFILE}
+ echo "==================================" >> ${DUMPFILE}
+ return 0
+ fi
+ ## Dump to dialog
+ ROUTES=$(netstat -rn > ${TMPFILE} )
+
eval "${DIALOG} --clear --no-collapse --title 'Routing table (netstat -rn) [arrows to scroll]'" \
"--tab-correct --tab-len 4 --textbox ${TMPFILE} "\
${LARGE_HEIGHT} ${LARGE_WIDTH}
@@ -1200,6 +1302,17 @@ netdiag_routes(){
##function
netdiag_ARP(){
+ DUMPFILE=$1
+ log "netdiag_ARP" "DUMPFILE: '${DUMPFILE}'"
+ if [ -n "${DUMPFILE}" ]; then
+ ## Dump to file
+ printf "\n======== ARP table\n" >> "${DUMPFILE}"
+ cat /proc/net/arp >> "${DUMPFILE}"
+ echo "==================================" >> ${DUMPFILE}
+ return 0
+ fi
+
+ # Dump to dialog
ARP=$(cat /proc/net/arp >${TMPFILE})
eval "${DIALOG} --clear --no-collapse --title 'ARP table (/proc/net/arp) [arrows to scroll]'" \
@@ -1210,8 +1323,26 @@ netdiag_ARP(){
##function
netdiag_connections(){
- SERV=$(netstat -tnp | sed -r -e 's/$/\n/g' > ${TMPFILE})
+ DUMPFILE=$1
+
+
+ HAS_NETSTAT=$(echo ${HAS_OPTS} | grep -c " netstat ")
+ if [ ${HAS_NETSTAT} -ne 1 ]; then
+ notfound "nestat"
+ return
+ fi
+
+ if [ -n "${DUMPFILE}" ]; then
+ ## Dump to file
+ printf "\n======== Active Network Connections\n" >> ${DUMPFILE}
+ netstat -tnp | sed -r -e 's/$/\n/g' >> ${DUMPFILE}
+ echo "==================================" >> ${DUMPFILE}
+ return 0
+ fi
+ ## Dump to dialog
+ SERV=$(netstat -tnp | sed -r -e 's/$/\n/g' > ${TMPFILE})
+
eval "${DIALOG} --clear --no-collapse "\
" --title 'Active network connections (netstat -tnp) [arrows to scroll]'" \
"--tab-correct --tab-len 4 --textbox ${TMPFILE} "\
@@ -1222,6 +1353,23 @@ netdiag_connections(){
##function
netdiag_services(){
+ DUMPFILE=$1
+
+ HAS_NETSTAT=$(echo ${HAS_OPTS} | grep -c " netstat ")
+ if [ ${HAS_NETSTAT} -ne 1 ]; then
+ notfound "nestat"
+ return
+ fi
+
+ if [ -n "${DUMPFILE}" ]; then
+ ## Dump to file
+ printf "\n======== Active network services\n" >> ${DUMPFILE}
+ netstat -ltnp | sed -r -e 's/$/\n/g' >> ${DUMPFILE}
+ echo "==================================" >> ${DUMPFILE}
+ return 0
+ fi
+
+
SERV=$(netstat -ltnp | sed -r -e 's/$/\n/g' > ${TMPFILE})
eval "${DIALOG} --clear --no-collapse "\
@@ -1234,6 +1382,11 @@ netdiag_services(){
##function
netdiag_ping(){
+ HAS_PING=$(echo ${HAS_OPTS} | grep -c " ping ")
+ if [ ${HAS_PING} -ne 1 ]; then
+ notfound "ping"
+ return
+ fi
eval "${DIALOG} --insecure --inputbox 'Host or IP to ping:' \
${INFO_HEIGHT} ${INFO_WIDTH}" 2> ${TMPFILE}
@@ -1258,6 +1411,11 @@ netdiag_ping(){
##function
netdiag_traceroute(){
+ HAS_TRACERT=$(echo ${HAS_OPTS} | grep -c " traceroute ")
+ if [ ${HAS_TRACERT} -ne 1 ]; then
+ notfound "traceroute"
+ return
+ fi
eval "${DIALOG} --insecure --inputbox 'Host or IP to trace:' \
${INFO_HEIGHT} ${INFO_WIDTH}" 2> ${TMPFILE}
@@ -1281,7 +1439,13 @@ netdiag_traceroute(){
##function
netdiag_query(){
-
+
+ HAST_HOST=$(echo ${HAS_OPTS} | grep -c " host ")
+ if [ $? -ne 1 ]; then
+ notfound "host"
+ return
+ fi
+
eval "${DIALOG} --insecure --inputbox 'Hostname or IP to query:' \
${INFO_HEIGHT} ${INFO_WIDTH}" 2> ${TMPFILE}
@@ -1303,6 +1467,20 @@ netdiag_query(){
}
+##function
+netdiag_devices(){
+
+ DUMPFILE=$1
+
+ if [ -n "${DUMPFILE}" ]; then
+ printf "\n======== Network Devices\n" >> ${DUMPFILE}
+ ip addr >> ${DUMPFILE}
+ echo "==================================" >> ${DUMPFILE}
+ return 0
+ fi
+}
+
+
##
## Main menu for network diagnostics
@@ -1319,6 +1497,7 @@ netdiag_menu(){
'DNS' 'List DNS servers' \
'Ping' 'Ping a host' \
'Query' 'DNS Query' \
+ 'Resolver' 'Show resolver configuration' \
'Routes' 'Show routing table' \
'Services' 'List active network daemons' \
'Traceroute' 'Show the route to a host' " \
@@ -1344,6 +1523,9 @@ netdiag_menu(){
"Query")
netdiag_query
;;
+ "Resolver")
+ netdiag_resolver
+ ;;
"Routes")
netdiag_routes
;;
@@ -1359,6 +1541,96 @@ netdiag_menu(){
}
+##function
+dump_file(){
+
+ CONF=$1
+
+ log "dump_file" "CONF: ${CONF}"
+
+ DUMPFILE="/tmp/network_dump.txt"
+
+ eval "${DIALOG} --fselect ${DUMPFILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" \
+ 2>${TMPFILE}
+
+ if [ $? -eq 0 ]; then
+ SEL_FILE=$(cat ${TMPFILE})
+ while [ -d "${SEL_FILE}" ]; do
+ eval "${DIALOG} --fselect ${SEL_FILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" \
+ 2>${TMPFILE}
+ if [ $? -eq 0 ]; then
+ SEL_FILE=$(cat ${TMPFILE})
+ else
+ eval "${DIALOG} --clear --msgbox 'Dump aborted' \
+ ${INFO_HEIGHT} ${INFO_WIDTH}"
+ return
+ fi
+ done
+
+ ## The dump starts here....
+ DUMPFILE=${SEL_FILE}
+ truncate -s 0 ${DUMPFILE}
+ echo "===== setnet ${VERSION}" >> ${DUMPFILE}
+ echo "===== Date: $(date)" >> ${DUMPFILE}
+ echo "===== Network configuration dump " >> ${DUMPFILE}
+ for c in ${CONF}; do
+ eval "netdiag_${c} \"${DUMPFILE}\""
+ done
+ else
+ eval "${DIALOG} --clear --msgbox 'Dump aborted' \
+ ${INFO_HEIGHT} ${INFO_WIDTH}"
+ fi
+}
+
+
+##function
+dump_pastebin(){
+
+ CONF=$1
+
+
+
+}
+
+##function
+dump_menu(){
+
+ eval "${DIALOG} --clear --checklist 'Select conf to dump' \
+ ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 10 \
+ 'ARP' 'ARP table' on \
+ 'devices' 'Device configuration' on \
+ 'DNS' 'DNS configuration' on \
+ 'resolver' 'System resolver configuration' on \
+ 'routes' 'Routing table' on \
+ 'connections' 'Active network connections' on \
+ 'services' 'Active network services' on " 2> ${TMPFILE}
+ if [ $? -ne 0 ]; then
+ return
+ fi
+
+ DUMP_CONF=$(cat ${TMPFILE})
+
+ eval "${DIALOG} --clear --cancel-label 'Up' \
+ --menu 'Dump configuration to:' \
+ ${INFO_HEIGHT} ${INFO_WIDTH} 6 \
+ 'File' 'Dump to file' \
+ 'Pastebin' 'Dump to pastebin'" \
+ 2> ${TMPFILE}
+ if [ $? -eq 1 ];then
+ return;
+ fi
+
+ ACTION=$(cat ${TMPFILE})
+ case ${ACTION} in
+ "File")
+ dump_file "${DUMP_CONF}"
+ ;;
+ "Pastebin")
+ dump_pastebin "${DUMP_CONF}"
+ ;;
+ esac
+}
+
##function
show_toplevel(){
@@ -1368,6 +1640,7 @@ show_toplevel(){
${WINDOW_HEIGHT} ${WINDOW_WIDTH} 6 \
'Setup' 'Setup interfaces' \
'Info' 'Network diagnostics' \
+ 'Dump' 'Dump current network status' \
'About' 'License & Copyleft'" 2> ${TMPFILE}
return $?
@@ -1407,11 +1680,12 @@ show_disclaimer(){
cat <<EOF > ${TMPFILE}
- == setnet.sh 0.1 ==
+ -+- setnet.sh ${VERSION} -+-
- (c) KatolaZ (katolaz@freaknet.org) -- 2016, 2017
+ Copyleft (C) KatolaZ (katolaz@freaknet.org)
+ 2016, 2017
- -+- This is the alpha release of setnet.sh -+-
+ -+- This is an alpha release of setnet.sh -+-
THIS IS FREE SOFTWARE
YOU CAN USE AND DISTRIBUTE IT UNDER THE
@@ -1423,7 +1697,7 @@ show_disclaimer(){
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE
See "About" for more information about
- copyright and license
+ your right and distribution terms
EOF
eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} 23 60"
@@ -1437,7 +1711,7 @@ initialise(){
TMPFILE=$( (tempfile) 2>/dev/null) || TMPFILE=/tmp/setnet_$$
WPA_PIDFILE=$( (tempfile) 2>/dev/null) || WPA_PIDFILE=/tmp/setnet_wpapid_$$
- trap cleanup 0 NONE HUP INT TRAP TERM QUIT
+ trap cleanup 0 HUP INT TRAP TERM QUIT
if [ -z ${TRUNCATE_LOG} ] || \
[ ${TRUNCATE_LOG} = "yes" ] || \
@@ -1479,6 +1753,9 @@ main(){
"Info")
netdiag_menu
;;
+ "Dump")
+ dump_menu
+ ;;
"About")
about_menu
;;
@@ -1503,9 +1780,9 @@ while getopts ":c:hv" opt; do
case $opt in
c)
- echo "Got option -c ${OPTARG}"
+ #echo "Got option -c ${OPTARG}"
SETNETRC=$(realpath ${OPTARG})
- echo "SETNETRC: ${SETNETRC}"
+ #echo "SETNETRC: ${SETNETRC}"
;;
h)
show_help $(basename $0)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 00:18:29 +0000