| Age | Commit message (Collapse) | Author |
|---|
|
This provides a formatted error response rather than a simple HTTP
error.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
This provides a formatted error response rather than a simple HTTP
error.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
These are more-or-less one-to-one translations but in the final hunk we
gain an HTTP error code where we used to send "200 OK", which is an
improvement.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
This will allow us to generate error responses with the correct HTTP
response code without needing all of the layout boilerplate.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Requesting a text/plain patch with bad commit id made cgit send text
without proper http headers. This results in "500 Internal Server Error"
with "Premature end of script headers" in server logs.
So print http headers before error message and return.
Signed-off-by: Christian Hesse <mail@eworm.de>
Reviewed-by: John Keeping <john@keeping.me.uk>
|
|
If we haven't got a "git" directory, it should still be possible to run
"make get-git", so we cannot include this file unconditionally.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Commit caed6cb (ui-shared: show absolute time in tooltip for relative
dates, 2014-12-20) added a toolip when we show a relative time.
However, in some cases we show a short date (that is, the date but not
the time) if an event was sufficiently far in the past and that commit
did not update that case to add the same tooltip.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
This will allow this code to be common with print_rel_date.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
We only need to hook write() if Lua filter's are in use. If support has
been disabled, remove the dependency on dlsym().
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Git's git-compat-util.h defines a "sane ctype" that does not use locale
information and works with signed chars, but it does not include
isgraph() so we have included ctype.h ourselves.
However, this means we have to include a system header before
git-compat-util.h which may lead to the system defining some macros
(e.g. _FILE_OFFSET_BITS on Solaris) before git-compat-util.h redefines
them with a different value. We cannot include ctype.h after
git-compat-util.h because we have defined many of its functions as
macros which causes a stream of compilation errors.
Defining our own "sane" isgraph() using Git's sane isprint() and
isspace() avoids all of these problems.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Follow the Git policy of including system headers in only one place.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
git-compat-util.h may define values that affect how system headers are
interpreted, so move sys/sendfile.h after cgit.h (which includes
git-compat-util.h).
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
git-compat-util.h may define various values that affect the
interpretation of system headers. In most places we include cgit.h
first, which pulls in git-compat-util.h, but this file does not depend
on anything else in CGit, so use git-compat-util.h directly.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
These are all included in git-compat-util.h (when necessary), which we
include in cgit.h.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
This pulls in the correct value of $(INSTALL) on a wide variety of
systems.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
On some systems (e.g. Solaris), /bin/sh is not a POSIX shell. Git
already provides suitable overrides in its config.mak.uname file and we
provide cgit.conf to allow the user to further change this.
The code for this is taken from Git's t/Makefile, meaning that we now
invoke the tests in the same way that Git does.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
|
|
|
|
This crept in while rebasing the previous commit onto an updated
upstream.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Teach the "log" UI to behave in the same way as "git log --follow", when
given a suitable instruction by the user. The default behaviour remains
to show the log without following renames, but the follow behaviour can
be activated by following a link in the page header.
Follow is not the default because outputting merges in follow mode is
tricky ("git log --follow" will not show merges). We also disable the
graph in follow mode because the commit graph is not simplified so we
end up with frequent gaps in the graph and many lines that do not
connect with any commits we're actually showing.
We also teach the "diff" and "commit" UIs to respect the follow flag on
URLs, causing the single-file version of these UIs to detect renames.
This feature is needed only for commits that rename the path we're
interested in.
For commits before the file has been renamed (i.e. that appear later in
the log list) we change the file path in the links from the log to point
to the old name; this means that links to commits always limit by the
path known to that commit. If we didn't do this we would need to walk
down the log diff'ing every commit whenever we want to show a commit.
The drawback is that the "Log" link in the top bar of such a page links
to the log limited by the old name, so it will only show pre-rename
commits. I consider this a reasonable trade-off since the "Back" button
still works and the log matches the path displayed in the top bar.
Since following renames requires running diff on every commit we
consider, I've added a knob to the configuration file to globally
enable/disable this feature. Note that we may consider a large number
of commits the revision walking machinery no longer performs any path
limitation so we have to examine every commit until we find a page full
of commits that affect the target path or something related to it.
Suggested-by: René Neumann <necoro@necoro.eu>
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
This will allow us to use this nice wrapper function elsewhere, avoiding
dealing with the diff queue when we only need to inspect a filepair.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
|
|
Otherwise we can't easily embed links to other /about/ pages.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
http://www.w3.org/International/questions/qa-escapes#use
|
|
Update to git version v2.5.0.
* Upstream commit 5455ee0573a22bb793a7083d593ae1ace909cd4c (Merge branch
'bc/object-id') changed API:
for_each_ref() callback functions were taught to name the objects
not with "unsigned char sha1[20]" but with "struct object_id".
* Upstream commit dcf692625ac569fefbe52269061230f4fde10e47 (path.c: make
get_pathname() call sites return const char *)
Signed-off-by: Christian Hesse <mail@eworm.de>
|
|
If the global option enable-filter-overrides is set to 1 the repo-specific
options repo.hide and repo.ignore never got processed.
Signed-off-by: Daniel Reichelt <hacking@nachtgeist.net>
Reviewed-by: John Keeping <john@keeping.me.uk>
|
|
One of the most frequent questions on the mailing list relates to the
idle time in the repository list. The answer to this is to use the
"agefile" feature to calculate the time of the last change whenever the
repository receives changes.
Add a sample post-receive hook in a new "contrib" directory so that we
can just point people at the repository in the future.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Update to git version v2.4.1, no changes required.
Signed-off-by: Christian Hesse <mail@eworm.de>
|
|
Signed-off-by: Christian Hesse <mail@eworm.de>
|
|
Update to git version v2.3.3, no changes required.
Signed-off-by: Christian Hesse <mail@eworm.de>
|
|
|
|
Instead of linking to the current page ("href='#'"), do not add a link
to a submodule entry at all if the module-link setting is not used.
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
|
|
|
|
|
|
|
|
Sparse complains about this table because we use the integer zero as the
NULL pointer. Use this as an opportunity to reformat the table so that
it always contains 8 elements per row, making it easier to see which
values are being set and which are not.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Sparse complains that we are using a plain integer as a NULL pointer
here, but in fact we do not have to specify a value for this variable at
all since it has static storage duration and thus will be initialized to
NULL by the compiler.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
These definitions should not be modified (and never are) so we can move
them to .rodata.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
This is not used outside this file and is not declared.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
These are not used outside this file and are not declared; they are also
never modified.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
These are not used outside this file and are not declared.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
These are not used outside this file and are not declared.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
These are not used outside this file and are not declared.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Bitfields are only defined for unsigned types.
Detected by sparse.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Sparse says things like:
warning: non-ANSI function declaration of function 'calc_ttl'
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
Update to git version v2.3.2, no changes required.
Signed-off-by: Christian Hesse <mail@eworm.de>
|
