diff options
Diffstat (limited to 'debian_package/setnet-0.1/debian')
36 files changed, 2083 insertions, 0 deletions
diff --git a/debian_package/setnet-0.1/debian/README.Debian b/debian_package/setnet-0.1/debian/README.Debian new file mode 100644 index 0000000..7c41578 --- /dev/null +++ b/debian_package/setnet-0.1/debian/README.Debian @@ -0,0 +1,21 @@ +setnet for Debian +---------------- + +setnet is a simple bash+dialog tool to congfigure ethernet and wifi networks. +It is still at alpha stage, so you should use it AT YOUR OWN RISK. + + +=== USAGE === + +setnet is installed under /usr/sbin/setnet.sh and by default it uses the file +/etc/setnetrc for configuration. There are currently only two defined variables +in setnetrc, namely + + - WPA_FILE + This is the file configuration file used by wpa_supplicant + - LOGNAME + This is the file where logs will be put + + + + -- Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org> Fri, 30 Dec 2016 16:06:26 +0000 diff --git a/debian_package/setnet-0.1/debian/README.source b/debian_package/setnet-0.1/debian/README.source new file mode 100644 index 0000000..46b1c87 --- /dev/null +++ b/debian_package/setnet-0.1/debian/README.source @@ -0,0 +1,10 @@ +setnet for Debian +---------------- + +<this file describes information about the source package, see Debian policy +manual section 4.14. You WILL either need to modify or delete this file> + + + + -- Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org> Fri, 30 Dec 2016 16:06:26 +0000 + diff --git a/debian_package/setnet-0.1/debian/changelog b/debian_package/setnet-0.1/debian/changelog new file mode 100644 index 0000000..1c9d39b --- /dev/null +++ b/debian_package/setnet-0.1/debian/changelog @@ -0,0 +1,5 @@ +setnet (0.1-1) unstable; urgency=medium + + * Initial release (Closes: #nnnn) <nnnn is the bug number of your ITP> + + -- Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org> Fri, 30 Dec 2016 16:06:26 +0000 diff --git a/debian_package/setnet-0.1/debian/compat b/debian_package/setnet-0.1/debian/compat new file mode 100644 index 0000000..ec63514 --- /dev/null +++ b/debian_package/setnet-0.1/debian/compat @@ -0,0 +1 @@ +9 diff --git a/debian_package/setnet-0.1/debian/control b/debian_package/setnet-0.1/debian/control new file mode 100644 index 0000000..256ad38 --- /dev/null +++ b/debian_package/setnet-0.1/debian/control @@ -0,0 +1,17 @@ +Source: setnet +Section: unknown +Priority: optional +Maintainer: Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org> +Build-Depends: debhelper (>=9) +Standards-Version: 3.9.8 +Homepage: http://kalos.mine.nu/setnet +#Vcs-Git: git://anonscm.debian.org/collab-maint/setnet.git +#Vcs-Browser: https://anonscm.debian.org/cgit/collab-maint/setnet.git + +Package: setnet +Architecture: all +Depends: ${shlibs:Depends}, ${misc:Depends}, bash, dialog, iproute2, dhclient +Suggests: wpasupplicant +Description: simple bash+dialog tool to configure networks + setnet is a relatively simple bash+dialog tool to configure ethernet + and wifi connections. diff --git a/debian_package/setnet-0.1/debian/copyright b/debian_package/setnet-0.1/debian/copyright new file mode 100644 index 0000000..f425891 --- /dev/null +++ b/debian_package/setnet-0.1/debian/copyright @@ -0,0 +1,21 @@ +Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ +Upstream-Name: setnet +Source: <http://kalos.mine.nu/setnet> + +Files: debian/* +Copyright: 2016 Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org> +License: GPL-3+ + This package is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + . + This package is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + . + You should have received a copy of the GNU General Public License + along with this program. If not, see <https://www.gnu.org/licenses/> + . + diff --git a/debian_package/setnet-0.1/debian/debhelper-build-stamp b/debian_package/setnet-0.1/debian/debhelper-build-stamp new file mode 100644 index 0000000..c166bc0 --- /dev/null +++ b/debian_package/setnet-0.1/debian/debhelper-build-stamp @@ -0,0 +1 @@ +setnet diff --git a/debian_package/setnet-0.1/debian/files b/debian_package/setnet-0.1/debian/files new file mode 100644 index 0000000..149e7b2 --- /dev/null +++ b/debian_package/setnet-0.1/debian/files @@ -0,0 +1 @@ +setnet_0.1-1_all.deb unknown optional diff --git a/debian_package/setnet-0.1/debian/init.d.ex b/debian_package/setnet-0.1/debian/init.d.ex new file mode 100644 index 0000000..08360e2 --- /dev/null +++ b/debian_package/setnet-0.1/debian/init.d.ex @@ -0,0 +1,26 @@ +#!/bin/sh +# kFreeBSD do not accept scripts as interpreters, using #!/bin/sh and sourcing. +if [ true != "$INIT_D_SCRIPT_SOURCED" ] ; then + set "$0" "$@"; INIT_D_SCRIPT_SOURCED=true . /lib/init/init-d-script +fi +### BEGIN INIT INFO +# Provides: setnet +# Required-Start: $remote_fs $syslog +# Required-Stop: $remote_fs $syslog +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: <Enter a short description of the software> +# Description: <Enter a long description of the software> +# <...> +# <...> +### END INIT INFO + +# Author: Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org> + +DESC="setnet" +DAEMON=/usr/bin/setnet + +# This is an example to start a single forking daemon capable of writing +# a pid file. To get other behaviors, implement do_start(), do_stop() or +# other functions to override the defaults in /lib/init/init-d-script. +# See also init-d-script(5) diff --git a/debian_package/setnet-0.1/debian/install b/debian_package/setnet-0.1/debian/install new file mode 100644 index 0000000..7385031 --- /dev/null +++ b/debian_package/setnet-0.1/debian/install @@ -0,0 +1,3 @@ +setnet.sh /usr/sbin +setnetrc /etc/ +wpa_setnet.conf /etc/wpa_supplicant/ diff --git a/debian_package/setnet-0.1/debian/manpage.1.ex b/debian_package/setnet-0.1/debian/manpage.1.ex new file mode 100644 index 0000000..8c3ca6b --- /dev/null +++ b/debian_package/setnet-0.1/debian/manpage.1.ex @@ -0,0 +1,56 @@ +.\" Hey, EMACS: -*- nroff -*- +.\" (C) Copyright 2016 Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org>, +.\" +.\" First parameter, NAME, should be all caps +.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection +.\" other parameters are allowed: see man(7), man(1) +.TH Setnet SECTION "December 30 2016" +.\" Please adjust this date whenever revising the manpage. +.\" +.\" Some roff macros, for reference: +.\" .nh disable hyphenation +.\" .hy enable hyphenation +.\" .ad l left justify +.\" .ad b justify to both left and right margins +.\" .nf disable filling +.\" .fi enable filling +.\" .br insert line break +.\" .sp <n> insert n+1 empty lines +.\" for manpage-specific macros, see man(7) +.SH NAME +setnet \- program to do something +.SH SYNOPSIS +.B setnet +.RI [ options ] " files" ... +.br +.B bar +.RI [ options ] " files" ... +.SH DESCRIPTION +This manual page documents briefly the +.B setnet +and +.B bar +commands. +.PP +.\" TeX users may be more comfortable with the \fB<whatever>\fP and +.\" \fI<whatever>\fP escape sequences to invode bold face and italics, +.\" respectively. +\fBsetnet\fP is a program that... +.SH OPTIONS +These programs follow the usual GNU command line syntax, with long +options starting with two dashes (`-'). +A summary of options is included below. +For a complete description, see the Info files. +.TP +.B \-h, \-\-help +Show summary of options. +.TP +.B \-v, \-\-version +Show version of program. +.SH SEE ALSO +.BR bar (1), +.BR baz (1). +.br +The programs are documented fully by +.IR "The Rise and Fall of a Fooish Bar" , +available via the Info system. diff --git a/debian_package/setnet-0.1/debian/manpage.sgml.ex b/debian_package/setnet-0.1/debian/manpage.sgml.ex new file mode 100644 index 0000000..c87d8aa --- /dev/null +++ b/debian_package/setnet-0.1/debian/manpage.sgml.ex @@ -0,0 +1,154 @@ +<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [ + +<!-- Process this file with docbook-to-man to generate an nroff manual + page: `docbook-to-man manpage.sgml > manpage.1'. You may view + the manual page with: `docbook-to-man manpage.sgml | nroff -man | + less'. A typical entry in a Makefile or Makefile.am is: + +manpage.1: manpage.sgml + docbook-to-man $< > $@ + + + The docbook-to-man binary is found in the docbook-to-man package. + Please remember that if you create the nroff version in one of the + debian/rules file targets (such as build), you will need to include + docbook-to-man in your Build-Depends control field. + + --> + + <!-- Fill in your name for FIRSTNAME and SURNAME. --> + <!ENTITY dhfirstname "<firstname>FIRSTNAME</firstname>"> + <!ENTITY dhsurname "<surname>SURNAME</surname>"> + <!-- Please adjust the date whenever revising the manpage. --> + <!ENTITY dhdate "<date>December 30 2016</date>"> + <!-- SECTION should be 1-8, maybe w/ subsection other parameters are + allowed: see man(7), man(1). --> + <!ENTITY dhsection "<manvolnum>SECTION</manvolnum>"> + <!ENTITY dhemail "<email>katolaz@freaknet.org</email>"> + <!ENTITY dhusername "Vincenzo (KatolaZ) Nicosia"> + <!ENTITY dhucpackage "<refentrytitle>Setnet</refentrytitle>"> + <!ENTITY dhpackage "setnet"> + + <!ENTITY debian "<productname>Debian</productname>"> + <!ENTITY gnu "<acronym>GNU</acronym>"> + <!ENTITY gpl "&gnu; <acronym>GPL</acronym>"> +]> + +<refentry> + <refentryinfo> + <address> + &dhemail; + </address> + <author> + &dhfirstname; + &dhsurname; + </author> + <copyright> + <year>2003</year> + <holder>&dhusername;</holder> + </copyright> + &dhdate; + </refentryinfo> + <refmeta> + &dhucpackage; + + &dhsection; + </refmeta> + <refnamediv> + <refname>&dhpackage;</refname> + + <refpurpose>program to do something</refpurpose> + </refnamediv> + <refsynopsisdiv> + <cmdsynopsis> + <command>&dhpackage;</command> + + <arg><option>-e <replaceable>this</replaceable></option></arg> + + <arg><option>--example <replaceable>that</replaceable></option></arg> + </cmdsynopsis> + </refsynopsisdiv> + <refsect1> + <title>DESCRIPTION</title> + + <para>This manual page documents briefly the + <command>&dhpackage;</command> and <command>bar</command> + commands.</para> + + <para>This manual page was written for the &debian; distribution + because the original program does not have a manual page. + Instead, it has documentation in the &gnu; + <application>Info</application> format; see below.</para> + + <para><command>&dhpackage;</command> is a program that...</para> + + </refsect1> + <refsect1> + <title>OPTIONS</title> + + <para>These programs follow the usual &gnu; command line syntax, + with long options starting with two dashes (`-'). A summary of + options is included below. For a complete description, see the + <application>Info</application> files.</para> + + <variablelist> + <varlistentry> + <term><option>-h</option> + <option>--help</option> + </term> + <listitem> + <para>Show summary of options.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><option>-v</option> + <option>--version</option> + </term> + <listitem> + <para>Show version of program.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + <refsect1> + <title>SEE ALSO</title> + + <para>bar (1), baz (1).</para> + + <para>The programs are documented fully by <citetitle>The Rise and + Fall of a Fooish Bar</citetitle> available via the + <application>Info</application> system.</para> + </refsect1> + <refsect1> + <title>AUTHOR</title> + + <para>This manual page was written by &dhusername; &dhemail; for + the &debian; system (and may be used by others). Permission is + granted to copy, distribute and/or modify this document under + the terms of the &gnu; General Public License, Version 2 any + later version published by the Free Software Foundation. + </para> + <para> + On Debian systems, the complete text of the GNU General Public + License can be found in /usr/share/common-licenses/GPL. + </para> + + </refsect1> +</refentry> + +<!-- Keep this comment at the end of the file +Local variables: +mode: sgml +sgml-omittag:t +sgml-shorttag:t +sgml-minimize-attributes:nil +sgml-always-quote-attributes:t +sgml-indent-step:2 +sgml-indent-data:t +sgml-parent-document:nil +sgml-default-dtd-file:nil +sgml-exposed-tags:nil +sgml-local-catalogs:nil +sgml-local-ecat-files:nil +End: +--> diff --git a/debian_package/setnet-0.1/debian/manpage.xml.ex b/debian_package/setnet-0.1/debian/manpage.xml.ex new file mode 100644 index 0000000..ae9864a --- /dev/null +++ b/debian_package/setnet-0.1/debian/manpage.xml.ex @@ -0,0 +1,291 @@ +<?xml version='1.0' encoding='UTF-8'?> +<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" +"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [ + +<!-- + +`xsltproc -''-nonet \ + -''-param man.charmap.use.subset "0" \ + -''-param make.year.ranges "1" \ + -''-param make.single.year.ranges "1" \ + /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl \ + manpage.xml' + +A manual page <package>.<section> will be generated. You may view the +manual page with: nroff -man <package>.<section> | less'. A typical entry +in a Makefile or Makefile.am is: + +DB2MAN = /usr/share/sgml/docbook/stylesheet/xsl/docbook-xsl/manpages/docbook.xsl +XP = xsltproc -''-nonet -''-param man.charmap.use.subset "0" + +manpage.1: manpage.xml + $(XP) $(DB2MAN) $< + +The xsltproc binary is found in the xsltproc package. The XSL files are in +docbook-xsl. A description of the parameters you can use can be found in the +docbook-xsl-doc-* packages. Please remember that if you create the nroff +version in one of the debian/rules file targets (such as build), you will need +to include xsltproc and docbook-xsl in your Build-Depends control field. +Alternatively use the xmlto command/package. That will also automatically +pull in xsltproc and docbook-xsl. + +Notes for using docbook2x: docbook2x-man does not automatically create the +AUTHOR(S) and COPYRIGHT sections. In this case, please add them manually as +<refsect1> ... </refsect1>. + +To disable the automatic creation of the AUTHOR(S) and COPYRIGHT sections +read /usr/share/doc/docbook-xsl/doc/manpages/authors.html. This file can be +found in the docbook-xsl-doc-html package. + +Validation can be done using: `xmllint -''-noout -''-valid manpage.xml` + +General documentation about man-pages and man-page-formatting: +man(1), man(7), http://www.tldp.org/HOWTO/Man-Page/ + +--> + + <!-- Fill in your name for FIRSTNAME and SURNAME. --> + <!ENTITY dhfirstname "FIRSTNAME"> + <!ENTITY dhsurname "SURNAME"> + <!-- dhusername could also be set to "&dhfirstname; &dhsurname;". --> + <!ENTITY dhusername "Vincenzo (KatolaZ) Nicosia"> + <!ENTITY dhemail "katolaz@freaknet.org"> + <!-- SECTION should be 1-8, maybe w/ subsection other parameters are + allowed: see man(7), man(1) and + http://www.tldp.org/HOWTO/Man-Page/q2.html. --> + <!ENTITY dhsection "SECTION"> + <!-- TITLE should be something like "User commands" or similar (see + http://www.tldp.org/HOWTO/Man-Page/q2.html). --> + <!ENTITY dhtitle "setnet User Manual"> + <!ENTITY dhucpackage "Setnet"> + <!ENTITY dhpackage "setnet"> +]> + +<refentry> + <refentryinfo> + <title>&dhtitle;</title> + <productname>&dhpackage;</productname> + <authorgroup> + <author> + <firstname>&dhfirstname;</firstname> + <surname>&dhsurname;</surname> + <contrib>Wrote this manpage for the Debian system.</contrib> + <address> + <email>&dhemail;</email> + </address> + </author> + </authorgroup> + <copyright> + <year>2007</year> + <holder>&dhusername;</holder> + </copyright> + <legalnotice> + <para>This manual page was written for the Debian system + (and may be used by others).</para> + <para>Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU General Public License, + Version 2 or (at your option) any later version published by + the Free Software Foundation.</para> + <para>On Debian systems, the complete text of the GNU General Public + License can be found in + <filename>/usr/share/common-licenses/GPL</filename>.</para> + </legalnotice> + </refentryinfo> + <refmeta> + <refentrytitle>&dhucpackage;</refentrytitle> + <manvolnum>&dhsection;</manvolnum> + </refmeta> + <refnamediv> + <refname>&dhpackage;</refname> + <refpurpose>program to do something</refpurpose> + </refnamediv> + <refsynopsisdiv> + <cmdsynopsis> + <command>&dhpackage;</command> + <!-- These are several examples, how syntaxes could look --> + <arg choice="plain"><option>-e <replaceable>this</replaceable></option></arg> + <arg choice="opt"><option>--example=<parameter>that</parameter></option></arg> + <arg choice="opt"> + <group choice="req"> + <arg choice="plain"><option>-e</option></arg> + <arg choice="plain"><option>--example</option></arg> + </group> + <replaceable class="option">this</replaceable> + </arg> + <arg choice="opt"> + <group choice="req"> + <arg choice="plain"><option>-e</option></arg> + <arg choice="plain"><option>--example</option></arg> + </group> + <group choice="req"> + <arg choice="plain"><replaceable>this</replaceable></arg> + <arg choice="plain"><replaceable>that</replaceable></arg> + </group> + </arg> + </cmdsynopsis> + <cmdsynopsis> + <command>&dhpackage;</command> + <!-- Normally the help and version options make the programs stop + right after outputting the requested information. --> + <group choice="opt"> + <arg choice="plain"> + <group choice="req"> + <arg choice="plain"><option>-h</option></arg> + <arg choice="plain"><option>--help</option></arg> + </group> + </arg> + <arg choice="plain"> + <group choice="req"> + <arg choice="plain"><option>-v</option></arg> + <arg choice="plain"><option>--version</option></arg> + </group> + </arg> + </group> + </cmdsynopsis> + </refsynopsisdiv> + <refsect1 id="description"> + <title>DESCRIPTION</title> + <para>This manual page documents briefly the + <command>&dhpackage;</command> and <command>bar</command> + commands.</para> + <para>This manual page was written for the Debian distribution + because the original program does not have a manual page. + Instead, it has documentation in the GNU <citerefentry> + <refentrytitle>info</refentrytitle> + <manvolnum>1</manvolnum> + </citerefentry> format; see below.</para> + <para><command>&dhpackage;</command> is a program that...</para> + </refsect1> + <refsect1 id="options"> + <title>OPTIONS</title> + <para>The program follows the usual GNU command line syntax, + with long options starting with two dashes (`-'). A summary of + options is included below. For a complete description, see the + <citerefentry> + <refentrytitle>info</refentrytitle> + <manvolnum>1</manvolnum> + </citerefentry> files.</para> + <variablelist> + <!-- Use the variablelist.term.separator and the + variablelist.term.break.after parameters to + control the term elements. --> + <varlistentry> + <term><option>-e <replaceable>this</replaceable></option></term> + <term><option>--example=<replaceable>that</replaceable></option></term> + <listitem> + <para>Does this and that.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><option>-h</option></term> + <term><option>--help</option></term> + <listitem> + <para>Show summary of options.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><option>-v</option></term> + <term><option>--version</option></term> + <listitem> + <para>Show version of program.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + <refsect1 id="files"> + <title>FILES</title> + <variablelist> + <varlistentry> + <term><filename>/etc/foo.conf</filename></term> + <listitem> + <para>The system-wide configuration file to control the + behaviour of <application>&dhpackage;</application>. See + <citerefentry> + <refentrytitle>foo.conf</refentrytitle> + <manvolnum>5</manvolnum> + </citerefentry> for further details.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><filename>${HOME}/.foo.conf</filename></term> + <listitem> + <para>The per-user configuration file to control the + behaviour of <application>&dhpackage;</application>. See + <citerefentry> + <refentrytitle>foo.conf</refentrytitle> + <manvolnum>5</manvolnum> + </citerefentry> for further details.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + <refsect1 id="environment"> + <title>ENVIRONMENT</title> + <variablelist> + <varlistentry> + <term><envar>FOO_CONF</envar></term> + <listitem> + <para>If used, the defined file is used as configuration + file (see also <xref linkend="files"/>).</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + <refsect1 id="diagnostics"> + <title>DIAGNOSTICS</title> + <para>The following diagnostics may be issued + on <filename class="devicefile">stderr</filename>:</para> + <variablelist> + <varlistentry> + <term><errortext>Bad configuration file. Exiting.</errortext></term> + <listitem> + <para>The configuration file seems to contain a broken configuration + line. Use the <option>--verbose</option> option, to get more info. + </para> + </listitem> + </varlistentry> + </variablelist> + <para><command>&dhpackage;</command> provides some return codes, that can + be used in scripts:</para> + <segmentedlist> + <segtitle>Code</segtitle> + <segtitle>Diagnostic</segtitle> + <seglistitem> + <seg><errorcode>0</errorcode></seg> + <seg>Program exited successfully.</seg> + </seglistitem> + <seglistitem> + <seg><errorcode>1</errorcode></seg> + <seg>The configuration file seems to be broken.</seg> + </seglistitem> + </segmentedlist> + </refsect1> + <refsect1 id="bugs"> + <!-- Or use this section to tell about upstream BTS. --> + <title>BUGS</title> + <para>The program is currently limited to only work + with the <package>foobar</package> library.</para> + <para>The upstreams <acronym>BTS</acronym> can be found + at <ulink url="http://bugzilla.foo.tld"/>.</para> + </refsect1> + <refsect1 id="see_also"> + <title>SEE ALSO</title> + <!-- In alpabetical order. --> + <para><citerefentry> + <refentrytitle>bar</refentrytitle> + <manvolnum>1</manvolnum> + </citerefentry>, <citerefentry> + <refentrytitle>baz</refentrytitle> + <manvolnum>1</manvolnum> + </citerefentry>, <citerefentry> + <refentrytitle>foo.conf</refentrytitle> + <manvolnum>5</manvolnum> + </citerefentry></para> + <para>The programs are documented fully by <citetitle>The Rise and + Fall of a Fooish Bar</citetitle> available via the <citerefentry> + <refentrytitle>info</refentrytitle> + <manvolnum>1</manvolnum> + </citerefentry> system.</para> + </refsect1> +</refentry> + diff --git a/debian_package/setnet-0.1/debian/menu.ex b/debian_package/setnet-0.1/debian/menu.ex new file mode 100644 index 0000000..3f6b8bb --- /dev/null +++ b/debian_package/setnet-0.1/debian/menu.ex @@ -0,0 +1,2 @@ +?package(setnet):needs="X11|text|vc|wm" section="Applications/see-menu-manual"\ + title="setnet" command="/usr/bin/setnet" diff --git a/debian_package/setnet-0.1/debian/postinst.ex b/debian_package/setnet-0.1/debian/postinst.ex new file mode 100644 index 0000000..63f6b54 --- /dev/null +++ b/debian_package/setnet-0.1/debian/postinst.ex @@ -0,0 +1,39 @@ +#!/bin/sh +# postinst script for setnet +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <postinst> `configure' <most-recently-configured-version> +# * <old-postinst> `abort-upgrade' <new version> +# * <conflictor's-postinst> `abort-remove' `in-favour' <package> +# <new-version> +# * <postinst> `abort-remove' +# * <deconfigured's-postinst> `abort-deconfigure' `in-favour' +# <failed-install-package> <version> `removing' +# <conflicting-package> <version> +# for details, see https://www.debian.org/doc/debian-policy/ or +# the debian-policy package + + +case "$1" in + configure) + ;; + + abort-upgrade|abort-remove|abort-deconfigure) + ;; + + *) + echo "postinst called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 diff --git a/debian_package/setnet-0.1/debian/postrm.ex b/debian_package/setnet-0.1/debian/postrm.ex new file mode 100644 index 0000000..14fe7e0 --- /dev/null +++ b/debian_package/setnet-0.1/debian/postrm.ex @@ -0,0 +1,37 @@ +#!/bin/sh +# postrm script for setnet +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <postrm> `remove' +# * <postrm> `purge' +# * <old-postrm> `upgrade' <new-version> +# * <new-postrm> `failed-upgrade' <old-version> +# * <new-postrm> `abort-install' +# * <new-postrm> `abort-install' <old-version> +# * <new-postrm> `abort-upgrade' <old-version> +# * <disappearer's-postrm> `disappear' <overwriter> +# <overwriter-version> +# for details, see https://www.debian.org/doc/debian-policy/ or +# the debian-policy package + + +case "$1" in + purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) + ;; + + *) + echo "postrm called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 diff --git a/debian_package/setnet-0.1/debian/preinst.ex b/debian_package/setnet-0.1/debian/preinst.ex new file mode 100644 index 0000000..09a88b6 --- /dev/null +++ b/debian_package/setnet-0.1/debian/preinst.ex @@ -0,0 +1,35 @@ +#!/bin/sh +# preinst script for setnet +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <new-preinst> `install' +# * <new-preinst> `install' <old-version> +# * <new-preinst> `upgrade' <old-version> +# * <old-preinst> `abort-upgrade' <new-version> +# for details, see https://www.debian.org/doc/debian-policy/ or +# the debian-policy package + + +case "$1" in + install|upgrade) + ;; + + abort-upgrade) + ;; + + *) + echo "preinst called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 diff --git a/debian_package/setnet-0.1/debian/prerm.ex b/debian_package/setnet-0.1/debian/prerm.ex new file mode 100644 index 0000000..725e2b8 --- /dev/null +++ b/debian_package/setnet-0.1/debian/prerm.ex @@ -0,0 +1,38 @@ +#!/bin/sh +# prerm script for setnet +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <prerm> `remove' +# * <old-prerm> `upgrade' <new-version> +# * <new-prerm> `failed-upgrade' <old-version> +# * <conflictor's-prerm> `remove' `in-favour' <package> <new-version> +# * <deconfigured's-prerm> `deconfigure' `in-favour' +# <package-being-installed> <version> `removing' +# <conflicting-package> <version> +# for details, see https://www.debian.org/doc/debian-policy/ or +# the debian-policy package + + +case "$1" in + remove|upgrade|deconfigure) + ;; + + failed-upgrade) + ;; + + *) + echo "prerm called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 diff --git a/debian_package/setnet-0.1/debian/rules b/debian_package/setnet-0.1/debian/rules new file mode 100755 index 0000000..2f54c47 --- /dev/null +++ b/debian_package/setnet-0.1/debian/rules @@ -0,0 +1,25 @@ +#!/usr/bin/make -f +# See debhelper(7) (uncomment to enable) +# output every command that modifies files on the build system. +#export DH_VERBOSE = 1 + + +# see FEATURE AREAS in dpkg-buildflags(1) +#export DEB_BUILD_MAINT_OPTIONS = hardening=+all + +# see ENVIRONMENT in dpkg-buildflags(1) +# package maintainers to append CFLAGS +#export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic +# package maintainers to append LDFLAGS +#export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed + + +%: + dh $@ + + +# dh_make generated override targets +# This is example for Cmake (See https://bugs.debian.org/641051 ) +#override_dh_auto_configure: +# dh_auto_configure -- # -DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH) + diff --git a/debian_package/setnet-0.1/debian/setnet-docs.docs b/debian_package/setnet-0.1/debian/setnet-docs.docs new file mode 100644 index 0000000..efea0a6 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet-docs.docs @@ -0,0 +1,2 @@ +README.Debian +README.source diff --git a/debian_package/setnet-0.1/debian/setnet.cron.d.ex b/debian_package/setnet-0.1/debian/setnet.cron.d.ex new file mode 100644 index 0000000..fd54f7d --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet.cron.d.ex @@ -0,0 +1,4 @@ +# +# Regular cron jobs for the setnet package +# +0 4 * * * root [ -x /usr/bin/setnet_maintenance ] && /usr/bin/setnet_maintenance diff --git a/debian_package/setnet-0.1/debian/setnet.debhelper.log b/debian_package/setnet-0.1/debian/setnet.debhelper.log new file mode 100644 index 0000000..73fb7fd --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet.debhelper.log @@ -0,0 +1,19 @@ +dh_update_autotools_config +dh_auto_configure +dh_auto_build +dh_auto_test +dh_prep +dh_auto_install +dh_install +dh_installdocs +dh_installchangelogs +dh_perl +dh_link +dh_strip_nondeterminism +dh_compress +dh_fixperms +dh_installdeb +dh_gencontrol +dh_md5sums +dh_builddeb +dh_builddeb diff --git a/debian_package/setnet-0.1/debian/setnet.default.ex b/debian_package/setnet-0.1/debian/setnet.default.ex new file mode 100644 index 0000000..ade741e --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet.default.ex @@ -0,0 +1,10 @@ +# Defaults for setnet initscript +# sourced by /etc/init.d/setnet +# installed at /etc/default/setnet by the maintainer scripts + +# +# This is a POSIX shell fragment +# + +# Additional options that are passed to the Daemon. +DAEMON_OPTS="" diff --git a/debian_package/setnet-0.1/debian/setnet.doc-base.EX b/debian_package/setnet-0.1/debian/setnet.doc-base.EX new file mode 100644 index 0000000..42bd26a --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet.doc-base.EX @@ -0,0 +1,20 @@ +Document: setnet +Title: Debian setnet Manual +Author: <insert document author here> +Abstract: This manual describes what setnet is + and how it can be used to + manage online manuals on Debian systems. +Section: unknown + +Format: debiandoc-sgml +Files: /usr/share/doc/setnet/setnet.sgml.gz + +Format: postscript +Files: /usr/share/doc/setnet/setnet.ps.gz + +Format: text +Files: /usr/share/doc/setnet/setnet.text.gz + +Format: HTML +Index: /usr/share/doc/setnet/html/index.html +Files: /usr/share/doc/setnet/html/*.html diff --git a/debian_package/setnet-0.1/debian/setnet.substvars b/debian_package/setnet-0.1/debian/setnet.substvars new file mode 100644 index 0000000..978fc8b --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet.substvars @@ -0,0 +1,2 @@ +misc:Depends= +misc:Pre-Depends= diff --git a/debian_package/setnet-0.1/debian/setnet/DEBIAN/conffiles b/debian_package/setnet-0.1/debian/setnet/DEBIAN/conffiles new file mode 100644 index 0000000..3479547 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/DEBIAN/conffiles @@ -0,0 +1,2 @@ +/etc/setnetrc +/etc/wpa_supplicant/wpa_setnet.conf diff --git a/debian_package/setnet-0.1/debian/setnet/DEBIAN/control b/debian_package/setnet-0.1/debian/setnet/DEBIAN/control new file mode 100644 index 0000000..6dee539 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/DEBIAN/control @@ -0,0 +1,13 @@ +Package: setnet +Version: 0.1-1 +Architecture: all +Maintainer: Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org> +Installed-Size: 64 +Depends: bash, dialog, iproute2, dhclient +Suggests: wpasupplicant +Section: unknown +Priority: optional +Homepage: http://kalos.mine.nu/setnet +Description: simple bash+dialog tool to configure networks + setnet is a relatively simple bash+dialog tool to configure ethernet + and wifi connections. diff --git a/debian_package/setnet-0.1/debian/setnet/DEBIAN/md5sums b/debian_package/setnet-0.1/debian/setnet/DEBIAN/md5sums new file mode 100644 index 0000000..d5492f6 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/DEBIAN/md5sums @@ -0,0 +1,4 @@ +8ca53becf53712ce6d851a60622b5df5 usr/sbin/setnet.sh +14d36df6a96346c9126ffe5cb4c2bbd6 usr/share/doc/setnet/README.Debian +d47fe95e38c07c7ab04d65e36ba03614 usr/share/doc/setnet/changelog.Debian.gz +e5218c2f383b136780a03ba5e3f610b2 usr/share/doc/setnet/copyright diff --git a/debian_package/setnet-0.1/debian/setnet/etc/setnetrc b/debian_package/setnet-0.1/debian/setnet/etc/setnetrc new file mode 100644 index 0000000..d460eed --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/etc/setnetrc @@ -0,0 +1,19 @@ +## +## +## setnetrc -- configuration file for setnet +## +## + +## +## The default configuration file for wpa_supplicant +## +WPA_FILE=/etc/wpa_supplicant/wpa_setnet.conf + + +## +## Logfile +## +LOGFILE=/var/log/setnet.log + + + diff --git a/debian_package/setnet-0.1/debian/setnet/etc/wpa_supplicant/wpa_setnet.conf b/debian_package/setnet-0.1/debian/setnet/etc/wpa_supplicant/wpa_setnet.conf new file mode 100644 index 0000000..07d4b6d --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/etc/wpa_supplicant/wpa_setnet.conf @@ -0,0 +1,3 @@ +ctrl_interface=/var/run/wpa_supplicant +update_config=1 + diff --git a/debian_package/setnet-0.1/debian/setnet/usr/sbin/setnet.sh b/debian_package/setnet-0.1/debian/setnet/usr/sbin/setnet.sh new file mode 100755 index 0000000..e5cba98 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/usr/sbin/setnet.sh @@ -0,0 +1,1120 @@ +#!/bin/bash + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or (at +# your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +# ---------------------------------------------------------------------- +# +# setnet.sh -- view and configure network interfaces +# +# ---------------------------------------------------------------------- +# +# (c) KatolaZ (katolaz@freaknet.org) -- 2016/12/26 +# +# + + +## +## Initialisation +## + +VERSION=0.1 + +DIALOGRC=~/.dialogrc + + +TOPSTR="setnet-0.1 [user: `id -run`]" + +DIALOG="dialog --backtitle \"${TOPSTR}\" " + + + +TMPFILE=`(tempfile) 2>/dev/null` || tempfile=/tmp/setnet_$$ +WPA_PIDFILE=`(tempfile) 2>/dev/null` || tempfile=/tmp/setnet_wpapid_$$ + +WINDOW_WIDTH=75 +WINDOW_HEIGHT=20 + +INFO_WIDTH=40 +INFO_HEIGHT=10 + +FORM_WIDTH=60 +FORM_HEIGHT=12 + +NET_FAMILIES="inet inet6" + +## +## Load setnetrc +## + +function load_setnetrc(){ + + WPA_FILE="" + LOGFILE="" + ## If we were given a parameter, is the rc file to load... + ## + if [ $# -ge 1 ]; then + . $1 + return + fi + + ## + ## Otherwise, let's look in the standard locations, namely: + ## + + ## + ## 1) /etc/setnetrc + ## + + if [ -f /etc/setnetrc ]; then + . /etc/setnetrc + fi + + ## + ## 2) ~/.setnetrc + ## + + if [ -f ~/.setnetrc ]; then + . ~/.setnetrc + fi + + + if [ -z ${WPA_FILE} ]; then + echo "Could not find WPA_FILE defined anywhere. Exiting" + exit 1 + fi + + if [ -z ${LOGFILE} ]; then + echo "Could not find LOGFILE defined anywhere. Exiting" + exit 1 + fi +} + + +function cleanup(){ + rm -f ${TMPFILE} + rm -f ${WPA_PIDFILE} +} + + +################### +# # +# LOGGING # +# # +################### + +## +## log() takes two arguments, namely the label and the message +## +## if the label is "_self", print the name of the function which +## called log() +## +function log(){ + + local LABEL=$1 + local MSG=$2 + + if [ ${LABEL} == "_self" ]; then + LABEL=${FUNCNAME[1]} + fi + echo -e "${LABEL}:" "${MSG}" >> "${LOGFILE}" + +} + +########################################## + +function edit_file(){ + + local FILEIN=$1 + log "edit_file" "editing file ${FILEIN}" + eval "${DIALOG} --title 'Editing file: ${FILEIN}' \ + --editbox ${FILEIN} ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 2> ${TMPFILE}" + + if [ $? -eq 0 ]; then + log "edit_file" "Copying ${TMPFILE} into ${FILEIN}" + if cp ${TMPFILE} ${FILEIN} + then + eval "${DIALOG} --clear --msgbox 'File ${FILEIN} saved successfully' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + else + eval "${DIALOG} --clear --msgbox 'Error saving file ${FILEIN}' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi + else + log "edit_file" "Editing of ${FILEIN} aborted..."xs + eval "${DIALOG} --clear --msgbox 'File ${FILEIN} not saved' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi +} + + + + +## +## Read all the configured addresses for a given inet family +## +function get_addr_family(){ + + local DEVNAME=$1 + local DEVFAMILY=$2 + + NUMADDR=`ip -f ${DEVFAMILY} addr show ${DEVNAME} | grep ${DEVFAMILY} | wc -l` + ADDR_STR="" + for i in `seq ${NUMADDR}`; do + ADDR=`ip -f ${DEVFAMILY} addr show ${DEVNAME} | grep ${DEVFAMILY} | \ + tail -n +$i | head -1 | sed -r -e "s:^\ +::g" | cut -d " " -f 2,4,6 |\ + sed -r -e "s:\ : -- :g"` + ADDR_STR="${ADDR_STR}\n${DEVFAMILY}: ${ADDR}\n" + done +} + +## +## Show the current configuration of a given device +## + +function show_device_conf(){ + + local DEVNAME=$1 + if [ ${DEVNAME} == "" ]; then + return -1 + fi + + DEVMAC=`ip link show ${DEVNAME} | tail -n +2 | sed -r 's/^\ +//g' | cut -d " " -f 2` + DEVCONF="MAC: ${DEVMAC}\n" + + log "_self" "NET_FAMILIES: \"${NET_FAMILIES}\"" + + for f in ${NET_FAMILIES}; do + get_addr_family ${DEVNAME} ${f} + log "_self" "family: ${f} ADDR_STR: \"${ADDR_STR}\"" + + if [ -z "${ADDR_STR}" ]; then + DEVCONF="${DEVCONF}${f}: Unconfigured\n" + else + DEVCONF="${DEVCONF}${ADDR_STR}" + fi + log "_self" "DEVCONF: ${DEVCONF}" + done + + DEVCONF="${DEVCONF}\n== name servers ==\n`cat /etc/resolv.conf | grep '^nameserver'`" + + eval "${DIALOG} --clear --title 'Current configuration of device: ${DEVNAME}' \ + --msgbox '\n\n${DEVCONF}' ${WINDOW_HEIGHT} ${WINDOW_WIDTH} " + return 0 + +} + + + +function config_ethernet_static(){ + + local DEV_IP="192.168.1.2" + local DEV_NET="192.168.1.0" + local DEV_NETMASK="255.255.255.0" + local DEV_GW="192.168.1.1" + local DEV_DNS1="208.67.222.222" + local DEV_DNS2="208.67.220.220" + + local DEVNAME=$1 + + exec 3>&1 + eval "${DIALOG} --clear --form 'Set network for device: ${DEVNAME}'" \ + ${FORM_HEIGHT} ${FORM_WIDTH} 0 \ + "IP" 1 1 "${DEV_IP}" 1 16 16 16 \ + "Network" 2 1 "${DEV_NET}" 2 16 16 16 \ + "Netmask" 3 1 "${DEV_NETMASK}" 3 16 16 16 \ + "Gateway" 4 1 "${DEV_GW}" 4 16 16 16 \ + "Primary DNS" 5 1 "${DEV_DNS1}" 5 16 16 16 \ + "Secondary DNS" 6 1 "${DEV_DNS2}" 6 16 16 16 2> ${TMPFILE} + + if [ $? -eq 1 ]; then + eval "${DIALOG} --infobox 'Configuration of ${DEVNAME} aborted' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + + read -d "*" DEV_IP DEV_NET DEV_NETMASK DEV_GW DEV_DNS1 DEV_DNS2 < ${TMPFILE} + eval "${DIALOG} --msgbox 'Proposed configuration of ${DEVNAME}:\n ${DEV_IP}\n${DEV_NET}\n${DEV_NETMASK}\n${DEV_GW}\n${DEV_DNS1}\n${DEV_DNS2}'\ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + + ## Configure IP + + ip link set ${DEVNAME} down + ip link set ${DEVNAME} up + ip address flush dev ${DEVNAME} + ip address add ${DEV_IP}/${DEV_NETMASK} dev ${DEVNAME} + + ## Configure GW + ip route flush dev ${DEVNAME} + ip route add ${DEV_NET}/${DEV_NETMASK} dev ${DEVNAME} + ip route add default via ${DEV_GW} + + ## Configure DNS + mv /etc/resolv.conf /etc/resolv.conf.bak + if [ -n ${DEV_DNS1} ]; then + echo "nameserver ${DEV_DNS1}" >> /etc/resolv.conf + fi + if [ -n ${DEV_DNS2} ]; then + echo "nameserver ${DEV_DNS2}" >> /etc/resolv.conf + fi + show_device_conf ${DEVNAME} +} + +function config_ethernet_dhcp(){ + + local DEVNAME=$1 + + eval "${DIALOG} --infobox 'Running \"dhclient ${DEVNAME}\"' ${INFO_HEIGHT} ${INFO_WIDTH}" + dhclient -r ${DEVNAME} + dhclient ${DEVNAME} + show_device_conf ${DEVNAME} +} + + +function config_ethernet(){ + + local DEVNAME=$1 + + while [ 1 -eq 1 ]; do + eval "${DIALOG} --clear --cancel-label 'Up' \ + --menu 'Configuring ${DEVNAME}' ${INFO_HEIGHT} ${INFO_WIDTH} 4 \ + 'DHCP' ''\ + 'Static' '' 2>${TMPFILE}" + if [ $? -eq 1 ]; then + return + fi + ACTION=`<${TMPFILE}` + case ${ACTION} in + "Static") + config_ethernet_static ${DEVNAME} + ;; + "DHCP") + config_ethernet_dhcp ${DEVNAME} + ;; + esac + done + +} + +function wifi_essid_from_mac(){ + + local DEVNAME=$1 + local W_MAC=$2 + + W_ESSID=`wpa_cli -i ${DEVNAME} scan_results | grep -E "^${W_MAC}" | \ + sed -r -e 's/\t/\|/g' | cut -d "|" -f 5` + + log "${FUNCNAME[0]}" "Recovered ESSID: ${W_ESSID}" +} + +function wifi_flags_from_mac(){ + local DEVNAME=$1 + local W_MAC=$2 + + W_FLAGS=`wpa_cli -i ${DEVNAME} scan_results | grep -E "^${W_MAC}" | \ + sed -r -e 's/\t/\|/g' | cut -d "|" -f 4` + log "wifi_essid_from_mac" "Recovered W_FLAGS: ${W_FLAGS}" + +} + + +function wifi_network_list(){ + + local DEVNAME=$1 + wpa_cli -i ${DEVNAME} list_networks | tail -n +2 | sed -r -e 's/\t/\|/g' > ${TMPFILE} + + NETLIST="" + LAST_IFS=$IFS + IFS="|" + while read NETNUM NETESSID NETBSSID NETFLAGS; do + IS_DIS=`echo ${NETFLAGS} | sed -r -e 's/\[//g;s/\]//g' | grep -i disabled | wc -l` + if [ ${IS_DIS} -eq 1 ]; then + STATUS="(DIS)" + else + STATUS="(ENAB)" + fi + IS_CUR=`echo ${NETFLAGS} | sed -r -e 's/\[//g;s/\]//g' | grep -i current | wc -l` + if [ ${IS_CUR} -eq 1 ]; then + STATUS="${STATUS}(CUR)" + fi + + + NETLIST="${NETLIST} ${NETNUM} \"${NETESSID}-${STATUS}\"" + done < ${TMPFILE} + IFS=${LAST_IFS} + + log "_self" "NETLIST: ${NETLIST}" +} + + +## +## Manage the authentication for a given wifi ESSID +## +function wifi_authenticate(){ + + local DEVNAME=$1 + local W_MAC=$2 + + + log "${FUNCNAME[0]}" "configuring ${DEVNAME} on ${W_MAC}" + ## This will set the variable W_ESSID appropriately + wifi_essid_from_mac ${DEVNAME} ${W_MAC} + + ## This will set the variable W_FLAGS appropriately + wifi_flags_from_mac ${DEVNAME} ${W_MAC} + + + log "${FUNCNAME[0]}" "configuring essid: ${W_ESSID} on device: ${DEVNAME}" + log "${FUNCNAME[0]}" "W_FLAGS: ${W_FLAGS}" + + + NET_EXISTS=`wpa_cli -i ${DEVNAME} list_networks | tail -n +2 | sed -r -e 's/\t/\|/g' \ + | cut -d "|" -f 2 | grep "${W_ESSID}$" | wc -l` + if [ ${NET_EXISTS} -ne 0 ]; then + NET_NUM=`wpa_cli -i ${DEVNAME} list_networks | tail -n +2 | sed -r -e 's/\t/\|/g' \ + | cut -d "|" -f 1,2 | grep "${W_ESSID}$" | cut -d "|" -f 1` + wpa_cli -i ${DEVNAME} remove_network ${NET_NUM} > ${TMPFILE} + STATUS=`<${TMPFILE}` + if [ ${STATUS} != "OK" ]; then + eval "${DIALOG} --msgbox 'Error while removing existing network:\n$essid: {W_ESSID}'" + ${INFO_HEIGHT} ${INFO_WIDTH} + return + fi + fi + + HAS_WPA=`echo "${W_FLAGS}" | grep -E "WPA.*-PSK" | wc -l` + + log "${FUNCNAME[0]}" "HAS_WPA: \"${HAS_WPA}\"" + + ### This section will configure WPA-PSK or WPA2-PSK + if [ ${HAS_WPA} != "0" ]; then + PSK="" + PSK_LENGTH=${#PSK} + while [ ${PSK_LENGTH} -le 7 ]; do + eval "${DIALOG} --insecure --inputbox 'Please insert WPA PSK\n(8 characters)' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2> ${TMPFILE}" + if [ $? -eq 1 ]; then + eval "${DIALOG} --clear --msgbox 'Network configuration aborted!!!' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return 1 + fi + PSK=`<${TMPFILE}` + PSK_LENGTH=${#PSK} + done + + + NET_NUM=`wpa_cli -i ${DEVNAME} add_network | tail -1` + + log "${FUNCNAME[0]}" `wpa_cli -i ${DEVNAME} set_network ${NET_NUM} ssid "\"${W_ESSID}\""` + log "${FUNCNAME[0]}" `wpa_cli -i ${DEVNAME} set_network ${NET_NUM} psk \"${PSK}\"` + ## remove the password from tmpfile + echo "" > ${TMPFILE} + eval "${DIALOG} --clear --defaultno --yesno \ + 'Network \"${W_ESSID}\" added\nSave configuration file?' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2> ${TMPFILE}" + if [ $? -eq 0 ]; then + ## Save the config file + wifi_save_file ${DEVNAME} + fi + + eval "${DIALOG} --msgbox 'Network added successfully' ${INFO_HEIGHT} ${INFO_WIDTH}" + return 0 + fi + + HAS_ESS=`echo "${W_FLAGS}" | grep -E "ESS" | wc -l` + + log "_self" "HAS_ESS: \"${HAS_ESS}\"" + + if [ ${HAS_ESS} != "0" ]; then + NET_NUM=`wpa_cli -i ${DEVNAME} add_network | tail -1` + + log "_self" "NET_NUM: ${NET_NUM}" + log "_self" `wpa_cli -i ${DEVNAME} set_network ${NET_NUM} ssid "\"${W_ESSID}\""` + log "_self" `wpa_cli -i ${DEVNAME} set_network ${NET_NUM} key_mgmt NONE` + eval "${DIALOG} --clear --defaultno --yesno \ + 'Network \"${W_ESSID}\" added\nSave configuration file?' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2> ${TMPFILE}" + if [ $? -eq 0 ]; then + ## Save the config file + wifi_save_file ${DEVNAME} + fi + + return 0 + else + eval " ${DIALOG} --msgbox 'Error occurred!!!!' ${INFO_HEIGHT} ${INFO_WIDTH}" + return 0 + fi + + ## No available authentication methods.... + + eval "${DIALOG} --msgbox 'No supported authentication method for ${W_ESSID}'" + return 1 +} + + + + +## +## Configure a new connection from a list of available wi-fi networks +## + +function wifi_add(){ + + local DEVNAME=$1 + + wpa_cli -i ${DEVNAME} scan + eval "${DIALOG} --timeout 4 --msgbox 'Scanning for networks...' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + wpa_cli -i ${DEVNAME} scan_results | grep -E "^[0-9a-f][0-9a-f]:" | \ + sed -r -e 's/\t/|/g' |\ + sort -t "|" -r -n -k 3 > ${TMPFILE} + + wifinets=() + LAST_IFS=$IFS + IFS="|" + while read W_MAC W_FREQ W_STRNGT W_FLAGS W_ESSID; do + + log "_self" "W_ESSID: \"${W_ESSID}\"" + wifinets+=(${W_MAC} "${W_ESSID} -- ${W_FLAGS}") + done < ${TMPFILE} + IFS=${LAST_IFS} + + + log "$_self" "Wifi nets: \n${wifinets}\n===" + dialog --menu 'Select a network' ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 10 \ + "${wifinets[@]}" 2> ${TMPFILE} + if [ $? -eq 1 ]; then + return + fi + + W_MAC=$(cat ${TMPFILE}) + + + wifi_authenticate ${DEVNAME} ${W_MAC} + if [ $? -ne 0 ]; then + eval "${DIALOG} --msgbox 'Error while configuring ${DEVNAME}' " + fi + return $? +} + + +function wifi_save_file(){ + + local DEVNAME=$1 + + wpa_cli -i ${DEVNAME} save_config | tail -1 > ${TMPFILE} + SAVE_STATUS=`<${TMPFILE}` + if [ ${SAVE_STATUS} == "OK" ]; then + eval "${DIALOG} --msgbox 'Current configuration dumped to file ${WPA_FILE}' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + else + eval "${DIALOG} --msgbox 'Error while saving configuration to file ${WPA_FILE}' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi +} + +function wifi_remove(){ + + local DEVNAME=$1 + + wifi_network_list ${DEVNAME} + + eval "${DIALOG} --menu 'Select network to remove' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 10 ${NETLIST} \ + 2> ${TMPFILE}" + + if [ $? -eq 0 ]; then + ## a network has been selected + NETNUM=`<${TMPFILE}` + WPA_STATUS=`wpa_cli -i ${DEVNAME} remove_network ${NETNUM} | tail -1 ` + if [ ${WPA_STATUS} == "OK" ]; then + eval "${DIALOG} --clear --defaultno --yesno \ + 'Network ${NETNUM} removed\nSave configuration file?' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2> ${TMPFILE}" + if [ $? -eq 0 ]; then + ## Save the config file + wifi_save_file ${DEVNAME} + fi + + return + else + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} NOT removed' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + else + eval "${DIALOG} --clear --msgbox 'No network removed!!!' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + +} + + +function wifi_restart_wpa(){ + + local DEVNAME=$1 + local WPA_FILE=$2 + + WPA_PID=`ps ax | grep wpa_supplicant | grep " -i ${DEVNAME}" | +sed -r -e 's/^\ +//g' | cut -d " " -f 1` + + log "${FUNCNAME[0]}" "WPA_PID: ${WPA_PID}" + kill -n 9 ${WPA_PID} + + if [ $? -ne 0 ]; then + eval "${DIALOG} --clear --msgbox 'Error killing wpa_supplicant' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi + + wpa_supplicant -B -i ${DEVNAME} -c ${WPA_FILE} -P${WPA_PIDFILE} + WPA_PID=`ps ax | grep wpa_supplicant | grep " -i ${DEVNAME}" | cut -d " " -f 1 ` + WPA_PID_SAVED=`<${WPA_PIDFILE}` + if [ [ -n ${WPA_PID} ] || [ ${WPA_PID} != ${WPA_PID_SAVED} ] ]; then + eval "${DIALOG} --clear --msgbox 'Error restarting wpa_supplicant' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + else + eval "${DIALOG} --clear --msgbox 'wpa_supplicant restarted successfully' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi + +} + + + +## +## wifi_enable: show the list of configured networks, and enable the +## one the used has clicked on +## + +function wifi_enable(){ + + local DEVNAME=$1 + + wifi_network_list ${DEVNAME} + + eval "${DIALOG} --menu 'Select configured network' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 10 ${NETLIST} \ + 2> ${TMPFILE}" + + if [ $? -eq 0 ]; then + ## a network has been selected + NETNUM=`<${TMPFILE}` + WPA_STATUS=`wpa_cli -i ${DEVNAME} enable ${NETNUM} | tail -1 ` + if [ ${WPA_STATUS} == "OK" ]; then + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} enabled' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + config_ethernet ${DEVNAME} + return + else + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} NOT enabled' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + else + eval "${DIALOG} --clear --msgbox 'No network enabled!!!' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi +} + + +function wifi_disable(){ + + local DEVNAME=$1 + wifi_network_list ${DEVNAME} + eval "${DIALOG} --menu 'Select configured network' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 10 ${NETLIST} \ + 2> ${TMPFILE}" + + if [ $? -eq 0 ]; then + ## a network has been selected + NETNUM=`<${TMPFILE}` + WPA_STATUS=`wpa_cli -i ${DEVNAME} disable ${NETNUM} | tail -1 ` + if [ ${WPA_STATUS} == "OK" ]; then + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} disabled' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + else + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} NOT disabled' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + else + eval "${DIALOG} --clear --msgbox 'No network disabled!!!' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi +} + + + +function wifi_load_file(){ + + local DEVNAME=$1 + + eval "${DIALOG} --fselect ${WPA_FILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH} \ + 2>${TMPFILE}|" + + if [ $? -eq 0 ]; then + SEL_FILE=`<${TMPFILE}` + while [ -d ${SEL_FILE} ]; do + eval "${DIALOG} --fselect ${SEL_FILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH} \ + 2>${TMPFILE}" + if [ $? -eq 0 ]; then + SEL_FILE=`<${TMPFILE}` + else + eval "${DIALOG} --clear --infobox 'WPA_FILE was not modified' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + done + + if [ -f ${SEL_FILE} ]; then + WPA_FILE=${SEL_FILE} + eval "${DIALOG} --clear --defaultno --yesno \ + 'WPA_FILE changed to ${WPA_FILE}\nRestart wpa_supplicant?' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + if [ $? -eq 0 ]; then + wifi_restart_wpa ${DEVNAME} ${WPA_FILE} + fi + else + eval "${DIALOG} --clear --infobox 'Invalid file name!\n WPA_FILE *not* changed' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + return + fi + else + eval "${DIALOG} --clear --infobox 'WPA_FILE was not modified' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi + +} + + + +function config_wifi(){ + + local DEVNAME=$1 + + while [ 1 -eq 1 ]; do + eval "${DIALOG} --clear --cancel-label 'Up' \ + --menu 'Configuring ${DEVNAME}\n(Current file: ${WPA_FILE})' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 12 \ + 'Restart' 'Restart wpa_supplicant' \ + 'Enable' 'Enable a configured network' \ + 'Disable' 'Disable a configured network' \ + 'Add' 'Configure a new network' \ + 'Remove' 'Delete an existing network' \ + 'Show' 'Show current configuration file' \ + 'Edit' 'Edit current configuration file' \ + 'Save' 'Save configuration to file'\ + 'Load' 'Load configuration from file'\ + 'New' 'Create new configuration file'\ + 2>${TMPFILE}" + if [ $? -eq 1 ]; then + return + fi + ACTION=`<${TMPFILE}` + case ${ACTION} in + "Restart") + ## Restart wpa_supplicant + wifi_restart_wpa ${DEVNAME} ${WPA_FILE} + ;; + "Enable") + wifi_enable ${DEVNAME} + ;; + "Disable") + wifi_disable ${DEVNAME} + ;; + "Add") + wifi_add ${DEVNAME} + ;; + "Remove") + wifi_remove ${DEVNAME} + ;; + "Show") + eval "${DIALOG} --title 'Current file: ${WPA_FILE}' \ + --textbox ${WPA_FILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + ;; + "Edit") + edit_file ${WPA_FILE} + ;; + "Save") + wifi_save_file ${DEVNAME} + ;; + "Load") + wifi_load_file ${DEVNAME} + ;; + "New") + eval "${DIALOG} --msgbox 'Sorry!Not yet implemented!' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2>${TMPFILE}" + ;; + esac + done + +} + + + +## +## (Re)-Configure a network device +## + +function configure_device(){ + + local DEVNAME=$1 + + case ${DEVNAME} in + eth*) + config_ethernet ${DEVNAME} + ;; + wlan*) + config_wifi ${DEVNAME} + ;; + *) + eval "${DIALOG} --clear --title 'ERROR' --msgbox \ + '${DEVNAME}: Unsupported device type' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + ;; + esac + + +} + + +function set_device_up(){ + + local DEVNAME=$1 + + ip link set ${DEVNAME} up + +} + +function set_device_down(){ + + local DEVNAME=$1 + + ip link set ${DEVNAME} down + +} + +function show_device_menu(){ + + local DEVNAME=$1 + while [ 1 -eq 1 ]; do + eval "${DIALOG} --clear --cancel-label 'Up' --menu 'Device: ${DEVNAME}' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 8 \ + 'View' 'View current configuration' \ + 'Conf' 'Configure device' \ + 'Start' 'Bring interface up' \ + 'Stop' 'Put interface down' \ + 'Restart' 'Restart interface' 2> ${TMPFILE}" + + if [ $? -eq 1 ]; then + return + fi + + DEV_ACTION=`<${TMPFILE}` + case ${DEV_ACTION} in + "View") + show_device_conf ${DEVNAME} + ;; + "Conf") + configure_device ${DEVNAME} + ;; + "Start") + set_device_up ${DEVNAME} + ;; + "Stop") + set_device_down ${DEVNAME} + ;; + "Restart") + set_device_down ${DEVNAME} + set_device_up ${DEVNAME} + ;; + *) + ;; + + esac + done +} + +## +## Show all the available network devices +## + +function show_devs() { + + DEVFILE=/proc/net/dev + DEVICES=`ip link show | awk 'NR % 2 == 1' | cut -d ":" -f 2` + + DEVICE_TAGS="" + + for i in `echo $DEVICES`; do + if [ $i != "lo" ]; then + DEVICE_TAGS="${DEVICE_TAGS} $i $i" + fi + done + + eval "${DIALOG} --clear --cancel-label 'Up' \ + --menu 'Select Interface to configure' ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 4 \ + ${DEVICE_TAGS} 2> ${TMPFILE}" + return $? +} + + +function dev_config_menu(){ + + while [ 1 -eq 1 ]; do + show_devs + if [ $? -eq 1 ]; then + return + fi + DEVNAME=`<${TMPFILE}` + show_device_menu ${DEVNAME} + done +} + +function show_info(){ + + cat <<EOF > ${TMPFILE} + +== setnet.sh 0.1 == + +setnet.sh is a simple state-less tool to manage and configure network +interfaces. It is a shell wrapper around the functionalities of "ip", +"dhclient", "wpa_cli", and can be used to configure network +connections via Ethernet/Wi-Fi interfaces. + +Both Static and DHCP-based IP configuration is supported. + +At the moment, only WPA-PSK and open (no key) Wi-Fi connections are +available. + +EOF + eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + return +} + +function show_copyright(){ + + cat <<EOF > ${TMPFILE} + +== setnet.sh 0.1 == + +(c) KatolaZ (katolaz@freaknet.org) -- 2016 + +EOF + eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + return +} + + +function show_license(){ + + cat <<EOF > ${TMPFILE} + +== setnet.sh 0.1 == + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or (at +your option) any later version. + +This program is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. + +---------------------------------------------------------------------- + + (c) KatolaZ <katolaz@freaknet.org> -- 2016 + +---------------------------------------------------------------------- + +EOF + eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + return +} + + + +function about_menu(){ + + while [ 1 -eq 1 ]; do + eval "${DIALOG} --cancel-label 'Up' --menu 'setnet ${VERSION} -- About' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 6 \ + 'Info' 'General information' \ + 'Copyright' 'Copyright information' \ + 'License' 'How to distribute this program' \ + 2> ${TMPFILE}" + if [ $? -eq 1 ];then + return; + fi + + ACTION=`<${TMPFILE}` + case ${ACTION} in + "Info") + show_info + ;; + "Copyright") + show_copyright + ;; + "License") + show_license + ;; + esac + done +} + + +function show_toplevel(){ + + eval "${DIALOG} --clear --cancel-label 'Quit' --menu 'Main Menu' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 6 \ + 'Setup' 'Setup interfaces' \ + 'About' 'Info & Copyright' 2> ${TMPFILE}" + return $? +} + +function show_help(){ + + local SCRIPTNAME=$1 + echo "Usage: ${SCRIPTNAME} [OPTION]" + echo "Options:" + echo -e "\t -c cfg_file\tLoad configuration from cfg_file." + echo -e "\t -v\t\tPrint version number and exit. " + echo -e "\t -h\t\tShow this help." + +} + +function show_version(){ + + local SCRIPTNAME=$1 + echo "${SCRIPTNAME} -- version ${VERSION}" + echo "Copyright (C) Vincenzo \"KatolaZ\" Nicosia (katolaz@freaknet.org) -- 2016" + echo "This is free software. You can use and redistribute it under the " + echo "terms of the GNU General Public Licence version 3 or (at your option)" + echo "any later version." + echo + echo "YOU USE THIS SOFTWARE AT YOUR OWN RISK." + echo "There is ABSOLUTELY NO WARRANTY; not even for MERCHANTABILITY or" + echo "FITNESS FOR A PARTICULAR PURPOSE." +} + +function show_disclaimer(){ + + cat <<EOF > ${TMPFILE} + + == setnet.sh 0.1 == + + (c) KatolaZ (katolaz@freaknet.org) -- 2016 + + -+- This is the alpha release of setnet.sh -+- + + THIS IS FREE SOFTWARE + YOU CAN USE AND DISTRIBUTE IT UNDER THE + TERMS OF THE GNU GENERAL PUBLIC LICENSE + + USE THIS SOFTWARE AT YOUR OWN RISK + + There is ABSOLUTELY NO WARRANTY; not even for + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE + + See "About" for more information about + copyright and license +EOF + + eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} 23 60" + return +} + + +function main(){ + + truncate -s 0 ${LOGFILE} + trap cleanup 0 $SIG_NONE $SIG_HUP $SIG_INT $SIG_TRAP $SIG_TERM + + show_disclaimer + + log "setnet" "Starting afresh on `date`" + SETNETRC=`realpath ${SETNETRC}` + log "main" "Using config file \"${SETNETRC}\"" + WPA_FILE=`realpath ${WPA_FILE}` + log "main" "Using WPA config file \"${WPA_FILE}\"" + LOFGILE=`realpath ${LOGFILE}` + log "main" "Using log file \"${LOGFILE}\"" + + while [ 1 -eq 1 ]; do + show_toplevel + if [ $? -eq 1 ]; then + cleanup + exit 1 + fi + ACTION=`<${TMPFILE}` + case ${ACTION} in + "Setup") + dev_config_menu + ;; + "About") + about_menu + ;; + esac + done + +} + + +## +## Get the options +## + +SETNETRC="" + +while getopts ":c:hv" opt; do + + case $opt in + c) + echo "Got option -c ${OPTARG}" + SETNETRC=`realpath ${OPTARG}` + echo "SETNETRC: ${SETNETRC}" + ;; + h) + show_help `basename $0` + exit 1 + ;; + v) + show_version `basename $0` + exit 1 + ;; + \?) + echo "Invalid option: -${OPTARG}" + exit 1 + ;; + :) + echo "Option -${OPTARG} requires an argument" + exit 1 + ;; + esac +done + + + +load_setnetrc ${SETNETRC} + +main + + diff --git a/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/README.Debian b/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/README.Debian new file mode 100644 index 0000000..7c41578 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/README.Debian @@ -0,0 +1,21 @@ +setnet for Debian +---------------- + +setnet is a simple bash+dialog tool to congfigure ethernet and wifi networks. +It is still at alpha stage, so you should use it AT YOUR OWN RISK. + + +=== USAGE === + +setnet is installed under /usr/sbin/setnet.sh and by default it uses the file +/etc/setnetrc for configuration. There are currently only two defined variables +in setnetrc, namely + + - WPA_FILE + This is the file configuration file used by wpa_supplicant + - LOGNAME + This is the file where logs will be put + + + + -- Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org> Fri, 30 Dec 2016 16:06:26 +0000 diff --git a/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/changelog.Debian.gz b/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/changelog.Debian.gz Binary files differnew file mode 100644 index 0000000..a71856b --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/changelog.Debian.gz diff --git a/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/copyright b/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/copyright new file mode 100644 index 0000000..f425891 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/copyright @@ -0,0 +1,21 @@ +Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ +Upstream-Name: setnet +Source: <http://kalos.mine.nu/setnet> + +Files: debian/* +Copyright: 2016 Vincenzo (KatolaZ) Nicosia <katolaz@freaknet.org> +License: GPL-3+ + This package is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + . + This package is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + . + You should have received a copy of the GNU General Public License + along with this program. If not, see <https://www.gnu.org/licenses/> + . + diff --git a/debian_package/setnet-0.1/debian/source/format b/debian_package/setnet-0.1/debian/source/format new file mode 100644 index 0000000..163aaf8 --- /dev/null +++ b/debian_package/setnet-0.1/debian/source/format @@ -0,0 +1 @@ +3.0 (quilt) diff --git a/debian_package/setnet-0.1/debian/watch.ex b/debian_package/setnet-0.1/debian/watch.ex new file mode 100644 index 0000000..0f01132 --- /dev/null +++ b/debian_package/setnet-0.1/debian/watch.ex @@ -0,0 +1,39 @@ +# Example watch control file for uscan +# Rename this file to "watch" and then you can run the "uscan" command +# to check for upstream updates and more. +# See uscan(1) for format + +# Compulsory line, this is a version 4 file +version=4 + +# PGP signature mangle, so foo.tar.gz has foo.tar.gz.sig +#opts="pgpsigurlmangle=s%$%.sig%" + +# HTTP site (basic) +#http://example.com/downloads.html \ +# files/setnet-([\d\.]+)\.tar\.gz debian uupdate + +# Uncommment to examine a FTP server +#ftp://ftp.example.com/pub/setnet-(.*)\.tar\.gz debian uupdate + +# SourceForge hosted projects +# http://sf.net/setnet/ setnet-(.*)\.tar\.gz debian uupdate + +# GitHub hosted projects +#opts="filenamemangle=s%(?:.*?)?v?(\d[\d.]*)\.tar\.gz%<project>-$1.tar.gz%" \ +# https://github.com/<user>/setnet/tags \ +# (?:.*?/)?v?(\d[\d.]*)\.tar\.gz debian uupdate + +# PyPI +# https://pypi.python.org/packages/source/<initial>/setnet/ \ +# setnet-(.+)\.tar\.gz debian uupdate + +# Direct Git +# opts="mode=git" http://git.example.com/setnet.git \ +# refs/tags/v([\d\.]+) debian uupdate + + + + +# Uncomment to find new files on GooglePages +# http://example.googlepages.com/foo.html setnet-(.*)\.tar\.gz |